Panasonic OMNIVISION PV-HD1000 User Manual download pdf (Page 20)

Timer Recording

^Important; If the remote control

work when pressed,

You can set up the D-VHS VCR to record a one

time, daily, or weekly program while you are

away or otherwise occupied. Up to 8 programs

can be stored in memory.

[^^Check list before you begin.

Q All connections are made.

(See pages 6-11.)

n TV and D-VHS VCR are plugged in and

turned on.

^ VCR/TV selector is set to “VCR.”

Clock is set to correct time.

Record tab in place. (See page 34.)

^ When Digital Timer Recording, use the

D-VHS cassette tapes.

important notes when using a

DSS receiver

• When recording programs via a DSS

receiver, the DSS receiver must be left on.

• When recording programs via an antenna or

cable, the DSS receiver must be turned off.

POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does not

press the VCR button on the remote and try the button again.

1 Press PROG* to display the

“SET PROGRAM” screen.

Press AT to select ‘TIMER

PROGRAM,” and then press ►

to display the program screen.

* If a program is already in memory, press AW

and ► to select an unused program number.

--------

SET PROGRAM

---------

VCR PIUS+ PROGRAM

SELECTS ▼ KEY

SET ;► KEY

END ;PROG KEY

START STOP CH

3 Press AT and ► to select and

set one of the following:

• 1-31 =One time recording

• DAILY =Same time MON-FRI

• WEEKLY (SUN-SAT) =Same time once a week

Example ^^8—9

.......

3i— i — 2 6—^

Today’s Date

-----

7 SELECTA/V Selactlon order DAILY

L WEEKLY WEEKLY WEEKLY J

^ (SAT) (MON) (SUN)

ESQ

SELECT:* » KEY

SET ;► KEY

ENO : PROG KEY

4 Press AT and to

select and set each of the

remaining items at right.

If you want to record digital TV,

channel selection should be "OTV.”

Remaining Items to be set;

• START time • STOP time

• CH(annel) number, DTV or

LINE for outside source recording

• Speed (SP, LP, SLP)

To Make Corrections

Repeatedly press ► to move the cursor to the right, or ^ to

move to the left to the incorrect entry and make the correction,

D Press PROG to end the program.

• This screen appears for confirmation.

If you use a DSS receiver and enter a

channel number of 100-125, the screen

at right appears.

Press AT to select “DSS" or

“CABLE,” and then press ► to enter.

• The confirmation screen appears

above right after this selection.

To Enter More Programs

Press AW and ► to select and set a blank

program number, and then repeat steps 3 and 4.

6 Press PROG to exit this mode.

Press POWER off to set the timer.

• When recording programs via a cable

box, make sure the cable box is left

ON and tuned to the desired channel.

-¡¡11112-

Multi Function Display

• For DTV Timer Recordina. make sure the set

too box fTU-DST50) IS left ON, and turned to

the desired channel. On the VCR, D-VHS

switch IS set to HS or HS/STD and oower is off.

NOTES

Digital programs which have copy protect data cannot be recorded.

A cassette with no record tab is ejected and “TIMER” flashes when the power is turned off to set the timer.

If the start times of two programs overlap, the lower numbered program will have priority.

If the start time for a timer recording comes up during a normal recording or One Touch Recording (pages 16,17,

19), the timer recording will not be performed.

If there is a power interruption of more than one minute, the recording will not be performed or continue.

If a timer recording by the D-VHS VCR and by the Set Top Box overlap, only the earlier program will be performed.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

Comments to this Manuals

No comments

Panasonic OMNIVISION PV-HD1000 User Manual Page 20

Comments to this Manuals

Related products and manuals for Cassette Decks Panasonic OMNIVISION PV-HD1000