Panasonic SCEN38 Operations Instructions download pdf (Page 8)

RQTV0293

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can

switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

 Press [FM/AM/MUSIC P.] to select “AM”.

 (While pressing [FM/AM/MUSIC P.] on the main unit)

Press and hold [2] until “REMOTE 2” appears on the main unit

display.

 Press and hold [ENTER] and [2] for at least 2 seconds.

The main unit and remote control are now set to operate in

“REMOTE 2” mode.

To return to “REMOTE 1” mode

Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3.

(“REMOTE 1” appears on the main unit during step 2.)

The remote control cannot work with the main unit if their modes are

different.

“REMOTE 1” or “REMOTE 2” appears on the main unit when you operate

the remote control.*

* If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2

seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2

seconds.

External unit (continued)

➡ Page 3 for the buttons position of remote control and main unit.

Changing the main unit and

remote control mode

The USB connectivity enables you to connect and play MP3 tracks from

USB mass storage class. Typically, USB memory devices (Bulk only

transfer).

Preparation:

Before connecting any USB mass storage device to the unit, ensure that

the data stored therein has been backed up.

It is not recommended to use a USB extension cable. The device connected

via the cable will not be recognised by this unit.

 Reduce the volume and connect the USB mass storage device.

 Press [USB q/h] to start play.

MP3

To pause play

Press [USB q/h].

Press again to resume play.

To stop play

Press [g].

“RESUME” is displayed. The position is

memorized.

Press [USB q/h] to resume play.

Press [g] again to clear the position.

To skip track

Press [u, 2] or [i, 1].

To skip album Press [ or , ALBUM] in the play mode.

Press [ or , ALBUM] once and then the

numbered buttons in the stop mode.

Direct access play

(Play starts with the

track you select.)

 Press [ or , ALBUM] to select the album.

 Press [i, 1] once and then press the

numbered buttons to select the desired track.

g Display function

Press [DISPLAY] repeatedly during play or pause.

For other operating functions, they are similar as those described in “Disc

operations” (➡ page 5 and 6).

To remove the USB mass storage device

Select a source other than “USB”.

Removing the USB mass storage device with it selected as a source can

damage the data stored in the device.

Elapsed time Album name Track name

ID3 (Artist) ID3 (Track) ID3 (Album)

Remaining time

g Compatible device

Devices which are defined as USB mass storage class:

USB devices that support bulk only transfer.

USB devices that support USB 2.0 full speed.

g Supported Format

Files must have the extension “.mp3” or “.MP3”.

CBI (Control/Bulk/Interrupt) is not supported.

A device using NTFS file system is not supported [Only FAT 16/32

(File Allocation Table 16/32) file system is supported].

Depending on the sector size, some files may not work.

This unit can access up to 255 albums and 2500 tracks.

The maximum number of tracks in a folder are 999 tracks.

Only one memory card will be selected when connecting a multiport

USB card reader. Typically the first memory card inserted.

Disconnect the USB card reader from the unit when you remove the

memory card. Failure to do so may cause malfunction to the device.

When you connect your digital audio player to the USB jack, it charges

all the time except in standby mode.

•

Note

USB enabled device

(not included)

USB operations

By connecting a Bluetooth Receiver (e.g SH-FX570R, sold separately),

you can receive and play the audio stored in your Bluetooth audio source

device (mobile phone etc).

 Connect the Bluetooth Receiver to the OPTION PORT through

a male-female cable (see the Bluetooth Receiver’s instruction

manual).

 Press [q/h, OPTION] to select OPTION as the source.

 Pair and play your Bluetooth audio device (see the device’s

instruction manual).

- To play / To pause play

Press [q/h, OPTION].

- Other basic operation functions are similar to “USB operations”.

(➡ above)

Bluetooth Receiver

(not included)

Connecting and playing a Bluetooth device

For continental Europe and the U.K.

male-female cable

(not included)

SC-EN38_E,EB,GN,GCS (RQTV0293)_MP.indd 8 2/18/2008 2:11:29 PM

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Panasonic SCEN38 Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for CD players Panasonic SCEN38