Panasonic SCPM3 Operations Instructions Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
RQTV0085
12
Timer (continued)
Using the play or record timerUsing the play or record timer
You can set the timer to come on at a certain time to wake you
up (play timer) or to record from the radio (record timer).
Preparation
Turn the unit on and set the clock (refer to page 11).
Timer Action
Play timer Prepare the music source you want to
listen to; cassette, disc or radio, and set
the volume.
Record timer Check the cassette’s erasure prevention
tabs (refer to page 9), insert the cassette
and tune to the radio station (refer to page
10).
1
Press [CLOCK/TIMER] repeatedly to select your
desired timer.
CLOCK
˚ PLAY
Original display
˚ REC
2
Within 5 seconds, press [ /REW/4] or [ /FF/¢]
to set the starting time.
Play timer indicator
Start time
Record timer indicator
3
Press [CLOCK/TIMER] to confirm.
4
Repeat steps 2 and 3 to set the finishing time.
Finish time
To activate the timer
5
Press [˚PLAY/REC] to turn on your desired timer.
˚ PLAY
no display (off)
˚ REC
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
Other basic operationsOther basic operations
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source
or volume
1) Press [
˚PLAY/REC] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings
(when the unit is on
or in standby mode)
Press [CLOCK/TIMER] repeatedly to
select
˚PLAY or ˚REC.
cancel Press [˚PLAY/REC] to clear the timer
indicators from the display.
Note
The play timer and record timer cannot be used together.
The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
The record timer will start 30 seconds before the set time, with the
volume muted.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while a timer is functioning, the
nish time setting will not be activated.
PM3_EB_En.indd 12PM3_EB_En.indd 12 2/7/06 10:53:03 AM2/7/06 10:53:03 AM
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments