Panasonic AW-HB505 User Manual download pdf (Page 24)

-22-

5. Camera and Pan/tilt Head Presetting

1) Select a camera and pan/tilt head with the CONTROL

switch on the multi hybrid control panel.

2) Pick up a desired object with the camera using

PAN/TILT Lever ZOOM Lever and FOCUS Lever of the

multi hybrid control panel. Select a white balance con-

trol mode using AUTO/ATW ATW Switch AUTO/ATW A

Switch or AUTO/ATW B Switch. To store iris data in the

memory, set IRIS AUTO/MANU Switch to the MANU

position and turn the iris control. When IRIS

AUTO/MANU Switch is in the AUTO position, iris data

will not be stored in the memory.

3) Keep MEMORY Switch of the multi hybrid control panel

depressed (MEMORY Switch lights and all the 10 but-

tons of PRESET Switch flash), press any of the buttons

[1] to [10] of PRESET Switch as desired to store the

data in the memory. Only that button of PRESET

Switches where the data is stored lights.

Note: If data is stored again in the same button of

PRESET Switches of the multi hybrid control

panel the preceding data is deleted.

4) Repeat Steps q and e to store the presettings of all

the cameras and pan/tilt heads in the memory.

6. Various Switch Settings

Select a desired operating camera and pan/tilt head with

the CONTROL switch on the multi hybrid control panel,

then control the camera and pan/tilt headControl the cam-

era and pan/tilt head using PRESET Switch, PAN/TILT

Lever, ZOOM Lever, FOCUS Lever, IRIS AUTO/MANU

Switch and other switches.

* In case of not changing the adjustment data and set-

tings, it is not necessary to repeat the adjustment and

setting procedures described in Sections 2 to 5.

1 2 ... 19 20 21 22 23 24 25 26 27 28

No comments

Panasonic AW-HB505 User Manual Page 24