Panasonic AW-RP555 User Manual download pdf (Page 5)

4 (E)

ENGLISH

 This unit is a multi hybrid control panel that controls the pan/tilt head system (pan/tilt

head and convertible camera).

 Please use a 10BASE-T straight cable (UTP category 5) to connect to this unit.

 Up to 5 additional pan/tilt head systems may be connected to this unit. The connection

between the pan/tilt head system and this unit may be extended up to 1,000 meters

when using AW-PH360, AW-PH350 or AW-PH650 as the pan/tilt head.

The distance may be extended to 800 meters when using other pan/tilt heads.

 Use cable compensation unit AW-RC400 when using a cable compensator for the video

signal from the pan/tilt head system.

Introduction

AW-PH350, AW-PH360 and AW-PH650

The control signals from the control panel can be connected to these units directly.

AW-PH300, AW-PH300A, AW-PH500 and AW-PH600

The control signals from the control panel must be converted into RS-232C signals

using a 422/232C converter before making the connection to the RS-232C connector

on the pan/tilt head.

Camera control is also performed using the RS-232C interface.

When using AW-PH500 the camera cannot be controlled.

Pan/tilt heads supported

Use the dedicated AC adapter AW-PS505A (sold separately) for the power supply.

Recommended adapter

Please contact a specialist when discarding this unit in consideration of the environment.

Caution

Rack mounting adapters (4U) ...........................................................................................

Join-up fixture .................................................................................................................... 1

Mounting screws (M4

8 mm) .......................................................................................... 8

Accessories

1 2 3 4 5 6 7 8 9 10 ... 295 296

No comments

Panasonic AW-RP555 User Manual Page 5