Panasonic PTL735E Operations Instructions download pdf (Page 53)

ENGLISH-53

Care and maintenance

Remedy

Problem

Indicator

display

Flashing (red)

It is nearly time to

replace the lamp

unit.

Illuminated (red)

An abnormality has been detected in the lamp

circuit.

B Does “REPLACE

LAMP” appear on

the screen after

the projector is

turned on?

B This occurs when

the operation time

for the lamp unit is

nearing 1800

hours. (when

LAMP POWER

has been set to

“HIGH”) Ask your

dealer or an

Authorised

Service Centre to

replace the lamp

unit.

Possible

cause

B The power may

have been turned

on straight away

after it was turned

off.

B Wait for a while

until the lamp unit

cools down before

turning the power

back on again.

B There may be an

abnormality in the

lamp circuit.

B Turn off the MAIN

POWER switch by

following the

procedure given

on page 25, and

then contact an

Authorised

Service Centre.

LAMP indicator

NOTE:

B Be sure to turn off the MAIN POWER switch by following the procedure

given in “Turning off the power” on page 25 before carrying out any of

the procedures in the “Remedy” column.

B If the main power turns off after the TEMP indicator starts flashing, it

means that an abnormality has occurred. Please contact an Authorised

Service Centre so that the necessary repairs can be made.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 65 66

Comments to this Manuals

No comments

Panasonic PTL735E Operations Instructions Page 53

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PTL735E