Panasonic DMRE85H Operations Instructions download pdf (Page 17)

RQT7460

Recording

Timer recording

[HDD] [RAM] [DVD-R]

You can enter up to 32 programmes up to a month in advance.

Entering S

HOWVIEW numbers is an easy way of timer recording. You

can find these numbers in TV listings in newspapers and magazines.

1 Press [ShowView].

2 Press the numbered buttons to enter

the SHOWVIEW number.

Press [2] to move back to correct a digit.

3 Press [ENTER].

≥Confirm the programme and make corrections if necessary

using [3, 4, 2, 1] (➡ page 18, step 3).

≥When “-- ---” appears in the “Name” column, you cannot set

timer recording. Press [3, 4] to select desired programme

position. After you have entered the information of a TV

station, it is kept in the unit’s memory.

≥You can also press [REC MODE] to change the recording

mode.

≥VPS/PDC (➡ right)

ON!)OFF (– – –)

≥You can also press [HDD] or [DVD] to select the recording

drive.

When the recording drive is “DVD” and there is not enough

remaining space, recording automatically switches to the

“HDD” (➡ right, Relief Recording).

≥RENEW (Auto Renewal Recording) [HDD] (➡ page 18)

ON!)OFF

≥Programme Name

Press [2, 1] to select “Programme Name” and press

[ENTER] (➡ page 30).

4 Press [ENTER].

The settings are stored.

Repeat steps 1–4 to programme other recordings.

5 Press [F TIMER].

“F” lights on the unit’s display to indicate timer recording

standby has been activated.

≥The message screen

appears. Only play is

possible while timer

recording is in standby (➡ page 20, 21). (You cannot play a

title recorded using a different encoding system from that of

the TV system currently selected on the unit.)

≥The unit is not off. To save power, turn the unit off by

pressing [Í DVD].

Using SHOWVIEW number to make timer

recordings

DRIVE SELECT

VOLUME

DIRECT TV REC

DVD

123

456

MANUAL SKIP

ShowView

CANCEL

INPUT SELECT

SKIP

STOP

PAU SE

PLAY/x1.3

SLOW/SEARCH

FUNCTIONS

ENTER

DIRECT NAVIGATOR

TOP MENU

RETURN

SUB MENU

CREATE

CHAPTER

TIMER

EXT LINK

PROG/CHECK

REC MODEERASE

REC

AUDIO

TIME SLIP

STATUS

DISPLAY

A B C

DUBBING

HDD DVD

3,4,2,1

ENTER

F TIMER

PROG/CHECK

EXT LINK

REC MODE

ShowView

HDD, DVD

¢ CANCEL

Í DVD

Numbered

buttons

ShowView

1:58 SP

DVD

30:24 SP

Remain HDD

12:53:00 15. 7. TUE

Enter ShowView Number by using 0-9 key.

TIMER

RECORDING

12:54:00 15. 7. TUE

Programme Name

ModeStopStartName Date

VPS

PDC

HDD

DVD

20:0019:0015/ 7 TUE SP

OFF HDD

1 ARD

1:58 SP

DVD

30:24 SP

Remain HDD

∫ To release the unit from recording standby

Press [F TIMER].

“F” goes out.

≥Be sure to press [F TIMER] before the programme start time to

put the unit on recording standby. Timer recording will work only

if “F” is displayed.

∫ To cancel recording when recording has

already begun

Press [F TIMER].

≥You can also press and hold [∫] on the main unit for more than

3 seconds to stop recording.

[Note]

≥Timer recordings are activated regardless of whether the unit is

turned on/off.

≥Timer recordings begin when the set time is reached even

when playing.

≥Timer recordings do not begin while editing or transferring

(dubbing) in normal speed mode (➡ page 31).

≥“F” flashes for about 5 seconds when the unit cannot go to

timer recording standby.

≥If the unit is not put in the timer recording standby mode at the

latest 10 minutes before the programmed timer recording

starting time, the “F” flashes on the unit display. In this case,

press [F TIMER] to put the unit in the timer recording standby

mode.

≥When you programme successive timer recordings to start

immediately one after the other, the unit cannot record the part

at the beginning of the later programmes (a few seconds when

recording with HDD or DVD-RAM and approximately 30

seconds when recording with DVD-R).

∫ VPS/PDC function (➡ page 45)

As long as a VPS/PDC signal is being broadcast by the TV

station, even if the broadcast programme time changes, the

recording time automatically changes to match the new

broadcast time.

To activate the VPS/PDC function

In step 3 in the VPS/PDC column, press [3, 4] to select “ON”.

∫ Relief Recording

When the recording drive is set to “DVD” for timer recording and

if the programme will not fit onto the disc, the recording drive will

be altered to the “HDD” automatically.

≥If there is no disc in the tray or the disc cannot be recorded on

or when timer recording starts while transferring (dubbing), the

recording drive will be altered to the HDD.

≥The Direct Navigator shows which programmes were relief-

recorded (“ ” is displayed.) (➡ page 20).

≥If the time remaining on the HDD is insufficient, as much of the

programme as possible will be recorded onto the HDD.

≥Relief recording is not activated when recording the programme

with VPS/PDC and it is extended so that it no longer fits on the

disc.

20:0019:00ARD 15/ 7 TUE01

Mode

Disc

space

StopStartNo. Name Date

TIMER

RECORDING

12:55:00 15. 7. TUE

New Timer Programme

OFF

VPS

PDC

HDD

DVD

1:58 SP

DVD

30:24 SP

Remain HDD

Check to make sure

“OK” is displayed.

Timer standby is active, only playback is possible.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 103 104

Comments to this Manuals

No comments

Panasonic DMRE85H Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRE85H