Panasonic DMREX773 Operations Instructions download pdf (Page 64)

VQT2J39

Changing the unit’s settings

(All factory default settings are indicated with underlined text.)

AV2 Settings

Set to match the connected equipment.

≥Press [OK] to show the following settings.

AV2 Input

Set to “S Video” when receiving or recording S Video output from

external equipment.

[Video

] [S Video]

Ext Link

This setting cannot be made when the “TV System” is set to

“NTSC” (> 63).

[Ext Link 1] When a digital satellite receiver which transmits a

special control signal recordings via the 21-pin

Scart cable is connected.

Start and stop timings of recording are controlled

by the control signal.

[Ext Link 2

] When external equipment with a timer function is

connected.

When it turns on, recording starts.

When it turns off, recording stops.

Others

Remote Control

Change the remote control code on the main unit and the remote

control (the two must match) if you place other Panasonic products

close together.

[DVD 1

] [DVD 2] [DVD 3]

Use “DVD 1”, the factory set code, under normal circumstances.

Press [

] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)

and press [OK].

To change the code on the remote control

2 While pressing [OK], press and hold the numbered button

([1], [2] or [3]) for more than 5 seconds.

3 Press [OK].

∫ When the following indicator appears on the

unit’s display

The unit’s remote control code

Change the code on the remote

control to match the main unit’s

(> step 2).

Executing “Shipping Condition” in the Setup menu returns the main

unit code to “DVD 1”. Change the remote control code to 1

(> step 2).

Setup

Tuning

Remote Control

Press “” and “OK” together

for more than 5 seconds on the remote

control.

Disc

Picture

Note

Clock

This unit usually obtains time and date information from digital

broadcasts and automatically corrects the time several times a

day. However, if the time is not set correctly, use the settings listed

in the method below.

Press [

3, 4]

to select “Off” of “Automatic” and press [OK].

2 Press [2, 1] to select the item you want to change.

The items change as follows:

Hour!#Minute!#Second!#Day!#Month!#Year

^-----------------------------------------------------------------------------------------J

3 Press [3, 4] to change the setting.

You can also use the numbered buttons for setting.

4 Press [OK] when you have finished the settings.

The clock starts.

If a TV station transmits a time setting signal, and when

“Automatic” in the Clock setting menu is set to “On”, the automatic

time correction function checks the time and if necessary it is

adjusted several times every day.

∫ To change the time offset

When the time is not correct, set “Time offset” (from –2h to +2h).

1 Press [3, 4] to select “On” of “Automatic” and press [OK] in

step 1.

Auto clock setting starts. This takes a few minutes.

“Automatic clock setting completed.” screen is displayed.

2 Press [1].

3 Press [3, 4] to select the correct time offset and press [OK].

4 Press [RETURN ].

Clock

Time

Automatic

Time offset

Date

Auto

Please set clock manually.

OK: store RETURN: leave

RETURN

SELECT

CHANGE

00 :

. 1

2010

Off

0 9

Number

Time offset > below

e.g., This screen appears

while receiving a digital

broadcast.

Note

DMREX773EC-VQT2J39_eng.book 64 ページ２０１０年１月１４日　木曜日　午後１時３１分

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 79 80

Comments to this Manuals

No comments

Panasonic DMREX773 Operations Instructions Page 64

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMREX773