Panasonic DMREX99V Operations Instructions Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
31
VQT2J46
Advanced
operations
Copying from a video cassette recorder
e.g., Connecting to the AV3 input terminals on the front
Turn off the unit and other video equipment before connecting.
Connect to terminals of the same colour.
Refer to “Connecting a television and VCR, digital satellite receiver
or analogue decoder” when connecting to the AV2 input terminals
on the rear panel. (> 83)
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
§
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
About the aspect when recording a programme (> 26)
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] [VHS]
Preparation
Press [DRIVE SELECT] to select the HDD, DVD or VHS drive.
Press [REC MODE] to select the recording mode.
When recording bilingual programmes, select “M 1” or “M 2” on the
external equipment
(> 26, Notes for recording).
When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the Setup menu (> 77).
This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD or VHS.)
To reduce noise in input from a video cassette recorder, set “Copy
NR” to “On” in the on-screen menu (> 68).
Check the time on the unit is correct.
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select “AV3”.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Perform step 1 (> above).
2 Start play on the other equipment.
3 When you want to start recording
Press [¥ REC].
Recording starts.
[VHS]
Perform step 1 (> above).
2 Press [1](PLAY).
Start playing the video cassette and find the recording start
point.
3 Press [;], then press [¥ REC].
Put the unit in recording standby mode.
4 Start play on the external device.
5 Press [;] at the point where you want
to start recording.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [].
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Using Flexible Recording (> 29), you can record the content of a
video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.
If it becomes time for a timer recording to start while copying, the
recording will start and the copying will stop.
If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
[VHS] It is not possible to record SECAM signal on a video cassette.
L/MONO - AUDIO- RVIDEO
S VIDEO
AV3 IN
S VIDEO
IN 2
VIDEO
/MONO
AUDIO
RL
Audio/Video
cable
S Video
cable
§
This unit
Other video equipment
Connect to Audio/Video output terminals.
Recording to HDD or DVD
Recording to VHS
Almost all videos and DVD-Video on sale have been treated to
prevent illegal copying. Any software that has been so treated
cannot be recorded using this unit.
Note
DMR-EX99VEG-VQT2J46_eng.book 31 ページ 2010年1月14日 木曜日 午前10時31分
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 99 100

Comments to this Manuals

No comments