Panasonic ERSB40 Operations Instructions download pdf (Page 13)

English

Cleaning

• Clean the main body, blade and the attachment after each use.

(If not cleaned, the motion will become poor and the sharpness

will worsen.)

• Turn the appliance off.

• Remove the main body from the AC adaptor.

With water

► Main body, blade and the attachment

To remove light dirt To remove heavy dirt

1. Remove the attachment

and turn the appliance on.

2. Run water down the water

inlet at the front of the main

body, rinse thoroughly for

approximately 20 seconds,

and then turn the appliance

off.

• Rinse with water and

shake up and down

several times to remove

the water.

Remove the attachment and

blade.

(See pages 11 and 14.)

2. Clean the main body, the

blade and the attachments

with running water.

• Rinse with water and

shake up and down

several times to remove

the water.

3. Wipe off the water with a

towel and let it dry naturally.

• It will dry faster with the

blade removed.

4. Apply the oil to the blade after

drying. (See page 14.)

5. Attach the blade and

attachment to the main body.

The mark on the left means suitable for cleaning under

an open water tap.

With the brush

► Main body and blade

1. Remove the blade. (See page 14.)

2. Brush off any hair trimmings from the

main body and from around the blade.

3. Brush off the hair trimmings from the

blade edge.

4. Brush any hair trimmings out from

between the stationary blade and the

moving blade while pressing down the

cleaning lever (b) to raise the moving

blade.



5. Apply the oil to the blade. (See page 14.)

6. Attach the blade and attachment to the main body.

ER-SB40_CAN.indb 13 2017/07/18 18:04:15

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Comments to this Manuals

No comments

Panasonic ERSB40 Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Hair trimmers & clippers Panasonic ERSB40