Panasonic SCAK640 Operations Instructions download pdf (Page 5)

RQT8043

RQTV0071

LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH

Step 2Step 2

- Inserting batteries into the remote control - Inserting batteries into the remote control

AA/R6/LR6

■ Batteries

• Insert so the poles (+ and –) match those in the remote control.

• Remove if the remote control is not going to be used for a long period of time.

Store in a cool, dark place.

• Replace if the unit does not respond to the remote control even when held

close to the front panel.

• Do not use rechargeable type batteries.

• Mishandling of batteries in the remote control can cause electrolyte leakage,

which may cause a ﬁ re.

• If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any part of

your body.

Do not:

• mix old and new batteries.

• use different types at the same time.

• heat or expose to ﬂ ame.

• take apart or short circuit.

• attempt to recharge alkaline or manganese batteries.

• use batteries if the covering has been peeled off.

• put heavy objects on the remote control.

• spill liquids onto the remote control.

■ Use

Aim at the remote control sensor, avoiding obstacles, at a maximum range

of 7 m (23 feet) directly in front of the unit.

Refer to page 6 for the remote control sensor position.

Step 3Step 3

- DEMO function - DEMO function

When the unit is ﬁ rst plugged in, a demonstration of its functions may be shown

on the display.

If the demo setting is off, you can show a demonstration by selecting “DEMO

ON”.

Press and hold [DISPLAY, –DEMO].

The display changes each time the button is held down.

NO DEMO (off) Ô DEMO ON (on)

While in standby mode, select “NO DEMO” to reduce power consumption.

Note:

DEMO function cannot be turned on when DIMMER is on.

Placement of speakers

TweeterTweeter

Subwoofer

Front speaker

(right)

Front speaker

(left)

Main

unit

Place the

subwoofer on the

ﬂ oor or a sturdy

shelf so that it will

not cause vibration.

Front speakers

• Place the front speakers so that the tweeter is on the

inside.

• You cannot take the front net off the speakers.

Use only the supplied speakers.

The combination of the main unit and speakers provide the

best sound. Using other speakers can damage the unit and

sound quality will be negatively affected.

Note:

• Keep your speakers at least 10mm (

˝) away from the system for

proper ventilation.

• These speakers do not have magnetic shielding. Do not place

them near televisions, personal computers or other devices easily

inﬂ uenced by magnetism.

• You can damage your speakers and shorten their useful life if you

play sound at high levels over extended periods.

• Reduce the volume in the following cases to avoid damage.

– When playing distorted sound.

– When adjusting the sound quality.

Caution

•

Use the speakers only with the

recommended system. Failure to do so

can damage the ampliﬁ er and speakers,

and can cause ﬁ re. Consult a qualiﬁ ed

service person if damage occurs or

if a sudden change in performance is

apparent.

• Do not attach these speakers to walls

or ceilings.

RQTV0071-P_1EN.indd 5RQTV0071-P_1EN.indd 5 11/22/05 3:34:56 PM11/22/05 3:34:56 PM

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Panasonic SCAK640 Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Home audio sets Panasonic SCAK640