Panasonic TX65CZR950 Operations Instructions

TX-65CZR950e HELP English

- 10 -•Audio Description 292•Advanced settings 293•Reset to Defaults 294Network•Network Connection 295•Network Status 296•VIERA Name 297•TV Re

Safety PrecautionsDisplays the precautions for viewing 3D images.= Note = ●Display the image (TV, external input, etc.) full-screen to use this functi

Source image formatIf the picture appears to be abnormal, refer to the table of images that can be seen for each 3D Mode Selection and each source ima

Tuning and editing channelsSetting menuYou can retune channels, create your favourite channel lists, skip unwanted channels, etc.1. Select the mode w

Favourites Edit List favourite DVB channelsCreate your favourite channel lists from various broadcasters (up to 4: Favourites 1 to 4).The favourites

Edit DVB favourites listYou can edit the favourites list while the cursor is on the channel in the favourites list. ●To move the channel1) Select

Channel List Skip unwanted channelsYou can hide (skip) unwanted channels. The hidden channels cannot be displayed except in this function.1. Select

●To rename the channel name (Analogue)1) Press (blue) to edit.2) Enter characters (maximum 5 characters) with Cursor buttons or Numeric buttons, an

Auto SetupAutomatically retunes the channels received in the area. ●This function is available if channel tuning is already performed. ●Only the selec

2) Set Satellite for the selected LNB.– Select No Satellite if you do not know the connected satellite. (Available satellite is searched in Auto Setup

DVB-C, DVB-T, Analogue1. Select Auto Setup and press OK to access.2. Set DVB-C Auto Setup Settings and press OK to store. (DVB-C) ●Scan ModeFull:Sc

- 11 -•Common Interface 325•VIERA Link Settings 326•Data Service Application 327•System Menu 328•Other Settings 329SupportHelp menu•Using Help m

DVB-via-IP ●Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-IP client connection Network

Manual Tuning ●Normally use Auto Setup or Update Channel List to retune DVB channels. ●If tuning has not been done completely or for adjusting the dir

AnalogueSet Analogue channel manually after Auto Setup.1. Select the channel position with Numeric buttons.2. Select the channel with Channel Up

DVB-via-IP (DVB-T)1. Select Frequency / Bandwidth / Modulation / FEC / Service ID and set with Cursor buttons or Numeric buttons.2. Select Start sc

Update Channel ListBy updating the DVB channel list, you can add new channels, delete removed channels or change channel names and positions automatic

New Channel MessageSelects whether to give a notification message when a new DVB channel is found or not. ●When a notification message appears, you ca

Signal ConditionSelects a channel and checks the signal condition with indicators. ●A good Signal Strength is not an indication of suitable signal rec

Other settingsAttenuator(On / Off)Sets the antenna system to use plural LNBs for receiving several satellites. ●If the DVB-C signal is too strong, the

Selectable satellites Selectable satellites and dish alignment to tune DVB-S channelsTo ensure your satellite dish is correctly installed, please co

RecordingUSB HDD setupPreparationsYou can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. ●Prepare t

Read firsteHELPHow to use Meaning of signsOK :Letters enclosed in brackets indicate remote control buttons.Menu :Letters in cyan indicate on-screen

●The data recorded on the USB HDD with this TV can only be played back on this TV. You cannot play back its content with another TV (including the TV

Setting for USB HDDFormat and set up the USB HDD with this TV in order to use it for recording.All the USB devices recognised as a mass storage device

●Mode of the USB HDD: The USB HDD is available for recording / playing back.Only one USB HDD on the list is available for recording.: The USB HDD is

Recording current programmeOne Touch RecordingRecords the current programme to the USB HDD immediately. ●Confirm the remote control code is “73”. Watc

REW LIVE TVRecords the current programme to the USB HDD constantly within the maximum recordable time. ●Confirm the remote control code is “73”. Watch

To stop REW LIVE TV1. Display the menu with MENU.2. Select Setup > Recording Setup > REW LIVE TV and press OK to access.3. Select Off to sto

Timer ProgrammingSetting Timer ProgrammingThis function allows you to select programmes that you want to record to the USB HDD. ●Not valid in Analogue

(Example) !: Overlapped timer events Function (USB HDD Rec.) TV mode: DVB-S: DVB-C: DVB-T: DVB-via-IP– You cannot change the mode within the menu.

Editing Timer Programming1. Display the menu with MENU.2. Select Timer > Timer Programming and press OK to access.3. Select the event. ●To change

Remote recordingYou can set timer programming with the network equipment (smartphone, etc.) from outside the home network. ●Ensure the network connect

Features4K resolutionYou can watch content in 4K format that has twice the horizontal and vertical resolution of the 1080p signal. Watching > 4K re

NoteDual tuner function (watching or recording 2 programmes simultaneously, watching a programme while recording another programme, etc.) is not avail

Technical informationUSB HDD USB HDD(for recording the digital TV programmes with this TV) ●The capacity of USB HDD that works with this TV is from

Media PlayerUsing Media PlayerInformationMedia Player allows you to enjoy photo, video or music recorded on the USB Flash Memory / network device, and

To insert or remove the USB Flash MemoryEnsure alignment is straight and complete when inserting or removing. ●To remove the USB Flash Memory safel

Selecting device / mode1. Insert the USB Flash Memory to the TV. Media Player > Using Media Player > Information ●To play back content in the U

= Note = ●Recorded TV is available for content recorded on the USB HDD with this TV. ●You may also access each mode directly from APPS List. ●Select t

Network deviceYou can enjoy photo, video or music stored in the network devices. ●To enable this function, connect this TV to your home network. Netwo

Sharing fileYou can share the files between PC and devices connected to this TV. ●To enable this function, connect this TV to your home network. Netwo

Photo modeSelecting fileSelect the file in the thumbnail view and press OK to start playback. : Error display ●To change the size of photos in the thu

Viewing photo Playback ●To operate Single view : To the previous photo : To the next photo : Stop (return to thumbnail)OK : Slideshow ●To display /

Touch Pad ControllerTouch Pad Controller is designed for the convenient operations on the application, internet content. You can operate the TV intuit

Sorting photos To sort by folder, recorded date or recorded month1. Display the view selection in the thumbnail view with (green).2. Select Folde

Using SlideshowSlideshow ends when all photos within the current thumbnail are viewed.1. Select the file from the thumbnail of photos for the first v

Screen Mode(Normal / Zoom)Selects enlarged or normal viewing. ●Not valid when Transition Effect is set to Motion ●Depending on the photo size, the pho

●To register music1) Select the music file and press OK to access. ●Depending on the condition of the device, select folders until you reach the des

Video modeSelecting file1. Select the title in the thumbnail view. : Error display : The file does not support thumbnail view. ●The preview will star

Watching video Playback from the selected scene in the titlePlayback of the selected scene starts and continues until the end of the title.1. Selec

●To change aspect1) Display Aspect Selection with ASPECT.2) Select the mode and press OK to set.Aspect1:Displays the content in original size.Aspect

Video SetupSet up the settings for Video mode.1. Display the option menu with OPTION.2. Select Video Setup with OK.3. Select one of the following it

Subtitle SettingsSets the subtitle setting. ●This function is available during playback.Subtitle:Display / hide subtitles (if available).Subtitle Text

Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To confirm o

TV AnywhereYou can watch TV and set timer event with the network equipment (smartphone, etc.) from outside the home network. Functions > TV Anywher

Recorded TV modeSelecting content ●For exclusive USB HDD ●To play back content in the USB HDD, ensure the connection and settings are completed. Recor

Watching recorded TV Playback ●To operate playback : Manual skip– Press to skip forward approx. 30 seconds.– Press and hold to skip backward appro

●To confirm or change the current status (if available) Watching > Basic > Option Menu ●To return to listBACK/RETURN= Note = ●The recorded cont

Grouping content1. Select the content to edit and press (blue) to tick in the content list.2. Display the option menu with OPTION.3. Select Create

Deleting content1. Select the content to edit and press (blue) to tick in the content list.2. Delete the content with (red).3. When a confirmati

Changing deviceYou can change the current device to another device directly in the same mode when two or more available devices are connected.1. Disp

Chapter ListYou can start playback from the chapter list you select.1. Display the chapter list with (yellow).2. Select the chapter and press OK to

Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To confirm o

Music modeSelecting file1. Select the folder in the thumbnail view.2. Start playback with (red). ●For details of supported file formats Media Playe

Playing music Playback of the selected file in the folder1. Select the folder and press OK to access.2. Select the file.3. Start playback with (

DVB-via-IPThis TV can serve as a DVB-via-IP server to provide broadcast streaming to another TV supporting DVB-via-IP client function. Functions >

Music SetupSet up the setting for Music mode. ●This function is available in the thumbnail view.1. Display the option menu with OPTION.2. Select Musi

Technical informationDevice handling caution ●Data modified with a PC may not be displayed. ●Do not remove the device while the TV is accessing data.

USB devices ●It is recommended to connect the device to the TV’s USB port directly. ●Some USB devices or USB HUB may not be used with this TV. ●You ca

Photo format Supported Photo formats ●JPEG (.jpg, .jpeg, .mpo)Sub-sampling:4:4:4, 4:2:2, 4:2:0Image resolution (pixel):8 × 8 to 30 719 × 17 279 ●DCF

Video format Supported Video formats ●AVI (.avi)Video codec:H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9Audio codec:AAC, ADPCM, Dolby Digital, Dolby Digit

●FLV (.flv)Video codec:H.264Audio codec:AAC, MP3 ●3GPP (.3gp, .3g2)Video codec:H.264, MPEG4Audio codec:AAC, HE-AAC ●PS (.mod, .mpg, .mpeg, .vob, .vro

Supported Subtitles formats ●MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●The video file and subtitles text file are inside the same folder, and

Music format Supported Music formats ●MP3 (.mp3) ●AAC / Apple Lossless (.m4a) ●Copy-protected files cannot be played back. ●FLAC (.flac) ●WMA / WMA

NetworkInternet contentInformationYou can access some specific websites supported by Panasonic, and enjoy internet content such as videos, games, comm

Selecting internet content1. Display APPS List with APPS. ●For details of APPS List Functions > APPS List ●Depending on the usage conditions, it ma

Dual TunerYou can watch or record 2 programmes simultaneously, watch a programme while recording another programme, etc. Functions > Multi Window &

Note ●If you cannot access the internet content, check the network connections and settings. Network > Network connections Network > Network set

DLNAIn-House streamingThis TV is a DLNA Certified™ product.DLNA® (Digital Living Network Alliance) is a standard that makes DLNA Certified digital ele

●To use a PC as a media serverPrepare the PC with Windows 7 / Windows 8 or ensure the server software is installed on the PC. “Windows 7 / Windows 8”

Sharing the content of this TV with another piece of network equipmentYou can enjoy the content of this TV with another network equipment connected

Using DLNATo use DLNA® features, ensure the preparations of the media server, network connections and network settings are completed. Network > DLN

Network connectionsInternet connectionA broadband network environment is required to be able to use internet services. ●If you do not have any broadba

DLNA connectionTo use DLNA features, you need a home network environment and you can operate the features without a broadband network environment. ●A

Wired connection (For DLNA and internet service) ETHERNET terminal LAN cable (Shielded) ●Use Shielded Twist Pair (STP) LAN cable. Hub / Router

Note ●Ensure to use a LAN straight cable. ●Set up and connect equipment required for the network environment. You cannot make such settings on this TV

Network settingsNetwork ConnectionEnsure the connections are completed before starting network setup. Network > Network connections Quick setup -

Easy MirroringYou can watch display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. You can also start the mir

7. Select Exit and press OK to set. ●To set manually Network > Network settings > Custom - Wireless Quick setup - Wired1. Display the menu wi

Custom - WirelessEnsure the connections are completed before starting network setup. Network > Network connections1. Display the menu with MENU.2.

4. Enter the encryption key of the access point and press OK to set. ●You can set characters using Numeric buttons. ●Press BACK/RETURN to store.5. I

6. Select Network Status and press OK to access. Network > Network settings > Network Status7. Select Exit and press OK to set.- 183 -

Custom - WiredEnsure the connections are completed before starting network setup. Network > Network connections1. Display the menu with MENU.2. Se

4. Select Network Status and press OK to access. Network > Network settings > Network Status5. Select Exit and press OK to set.= Note = ●To deac

Custom - Wireless Access PointYou can use the TV as a wireless access point and connect the network equipment without an access point. ●Confirm the PI

Network StatusDisplays and checks the network status (MAC Address, current network settings, etc.).1. Display the menu with MENU.2. Select Network &g

VIERA NameSets your favourite name for this TV.1. Display the menu with MENU.2. Select Network > VIERA Name and press OK to access.3. Enter chara

TV Remote App SettingsSets to control the TV with the equipment (smartphone, etc.) connected to your network.1. Display the menu with MENU.2. Select

WatchingBasicSatellite connectionPlease ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●Exte

Home Streaming(Always / Only when powered on)Enables sharing the TV programme and content of this TV with the network equipment (smartphone, etc.) in

Network Link SettingsSets to control the TV with devices connected to the network.1. Display the menu with MENU.2. Select Network > Network Link S

= Note = ●Depending on the area, this function may not be available. For details, consult your local Panasonic dealer.- 192 -

DVB-via-IP Server SettingsSelects TV signal and enables tuning in DVB-via-IP server function. Functions > DVB-via-IP > DVB-via-IP Server Setting

TV Anywhere SettingsSettings for watching TV or editing timer programming with the network equipment (smartphone, etc.) from outside the home network.

File Sharing SettingsFile Sharing Server(On / Off)Sets to share the files between PC and devices connected to this TV. Media Player > Using Media P

Mirroring SettingsSettings for the mirroring function Functions > Mirroring > Mirroring Settings- 196 -

Software UpdateAccesses the specific website to update the TV’s software if any updates are available.1. Display the menu with MENU.2. Select Network

New Software MessageSelects whether to give a notification message when new software is found via network or not.1. Display the menu with MENU.2. Sel

PhotosSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-Hou

- 2 -Read firsteHELP•How to use 12Features•4K resolution 13•Touch Pad Controller 14•TV Anywhere 15•DVB-via-IP 16•Dual Tuner 17•Easy Mirroring

Single TunerConnect the satellite IN 1 terminal to the satellite dish. ●Watching or recording 2 DVB-S programmes simultaneously, etc. are not avail

Viewing photo Playback ●To operate Single view : To the previous photo : To the next photo : Stop (return to list)OK : Slideshow ●To display / hide

Using SlideshowSlideshow ends when all photos within the list are viewed.1. Select the file from the thumbnail of photos for the first view.2. Start

Interval(Long / Normal / Short)Selects slideshow interval. ●Not valid when Transition Effect is set to MotionRepeat(On / Off)Slideshow repeatBack Grou

VideosSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-Hou

Watching video PlaybackIf you have stopped the last playback halfway, a confirmation screen may be displayed to select whether to start from where y

●To change aspect1) Display Aspect Selection with ASPECT.2) Select the mode and press OK to set.Aspect1:Displays the content in original size.Aspect

Video SetupSet up the settings for video file operations on this TV.1. Display the option menu with OPTION.2. Select Video Setup and press OK to acce

Subtitle Text Delay:Adjusts the delay time for the subtitles.Repeat(On / Off)Playback repeat within the selected file- 207 -

Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To confirm o

MusicSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-Hous

Basic connectionPlease ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●External equipment an

Playing music Playback ●To operate playback : Rewind : Fast forward : StopOK : Pause (displays the time seek bar) / Playback ●To jump to the specifi

Music SetupSet up the settings for music file operations on this TV.1. Display the option menu with OPTION.2. Select Music Setup > Repeat with OK.

Technical informationPhoto format Supported Photo formats ●JPEG (.jpg, .jpeg, .mpo)Sub-sampling:4:4:4, 4:2:2, 4:2:0Image resolution (pixel):8 × 8 to

Video format Supported Video formats ●AVI (.avi)Video codec:H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9Audio codec:AAC, ADPCM, Dolby Digital, Dolby Digit

●FLV (.flv)Video codec:H.264Audio codec:AAC, MP3 ●3GPP (.3gp, .3g2)Video codec:H.264, MPEG4Audio codec:AAC, HE-AAC ●PS (.mod, .mpg, .mpeg, .vob, .vro

Supported Subtitles formats ●MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●The video file and subtitles text file are inside the same folder, and

Music format Supported Music formats ●MP3 (.mp3) ●AAC / Apple Lossless (.m4a) ●Copy-protected files cannot be played back. ●FLAC (.flac) ●WMA / WMA

FunctionsAPPS ListInformationVarious applications (internet content, network content, Media Player, etc.) can be accessed easily from APPS List. APP

How to useYou can access special features such as internet content, network content, Media Player, etc. from APPS List.1. Display APPS List with APPS.

Voice ControlInformationVoice Control function allows you to operate the TV (e.g. selecting a channel), search the content from various features, etc.

DVD Recorder (VCR) / Set top box HDMI terminal HDMI cable Set top box Cable AV1 (SCART) terminal SCART cable– AV1 (SCART) adaptor (supplied)

How to use1. Press of Touch Pad Controller to display the operation guide. ●When a confirmation screen is displayed, read carefully and start Voice

SettingsYou can set items for Voice Control function.1. Display the menu with MENU.2. Select Setup > Voice Control Settings and press OK to access

Note ●When you start Voice Control function, sound level of the TV becomes low. ●Voice Control function may not work properly in the following conditi

Touch Pad ControllerInformationTouch Pad Controller is designed for the convenient operations, especially, on internet content. You can operate the TV

PairingPerform the registration when Touch Pad Controller is used for the first time.The registration starts automatically when you press any buttons

Identifying controls Standby On / Off switch Volume Up / Down On-screen remote control– Press to display the remote control GUI (Graphical User In

APPS– Displays APPS List.= Note = ●To use Standby On / Off switch, point the controller directly at the TV’s remote control signal receiver because

Settings1. Display the menu with MENU.2. Select Setup > VIERA Touch Pad Controller and press OK to access.3. Select one of the following items an

TV AnywhereHow to useYou can watch TV and set timer event with the network equipment (smartphone, etc.) from outside the home network. Smartphone, et

TV Anywhere Settings1. Display the menu with MENU.2. Select Network > TV Anywhere Settings and press OK to access.3. Select one of the following

●Use a fully wired SCART cable. ●Check the terminal type and cable plugs are correct for connection.- 23 -

MirroringHow to useYou can watch display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. Smartphone, etc. TV

Mirroring SettingsYou can set items for the mirroring function.1. Display the menu with MENU.2. Select Network > Mirroring Settings and press OK.3

DVB-via-IPDVB-via-IP server connectionThis TV can serve as a DVB-via-IP server to provide broadcast streaming to another TV supporting DVB-via-IP clie

●To confirm the current network settings Network > Network settings > Network Status ●Additional information about the services may be found on

DVB-via-IP Server Settings Preparations ●Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-I

DVB-via-IP client connectionThis TV has DVB-via-IP client function and can connect to DVB-via-IP server to watch broadcast streaming.Please ensure tha

Wireless connection Built-in wireless LAN (Rear of the TV) Access point DVB-via-IP server Satellite dish / Terrestrial aerial / Cable= Note = ●

DVB-via-IP Server Selection Preparations ●Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-

Note ●Depending on the network condition and broadcast, this function may not be available. ●This function is not available when the TV is turned off

Multi WindowInformationDisplays two windows at once for viewing the TV programmes or external input (AV / COMPONENT / HDMI) as shown below (example).

Selecting channel1. Select the mode with TV.DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue ●Selectable modes vary depending on the channels stored.2.

How to useYou can select a channel while watching another programme or external input.1. Display APPS List with APPS.2. Select Multi Window and press

= Note = ●Operations vary while using DVB-via-IP server function as following.PandP: Press (yellow) to switch to Picture-and-Picture mode.PinP: Press

Note ●This function may not work properly depending on the signal format. ●Ensure that Dual Tuner Mode is set to On in LNB Configuration to display DV

VIERA Link “HDAVI Control™”Summary of VIERA LinkEnjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control™” function.V

VIERA Link (HDMI connection) ●Use a fully wired HDMI compliant cable. ●Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an

VIERA Link (HDMI and Audio out connections) ●Use a fully wired HDMI compliant cable. ●Connect the equipment supporting VIERA Link to the TV’s HDMI

Available features (HDMI and Audio out connections)Player theatre ●Easy playback ●Power on Link ●Power off Link ●Intelligent Auto Standby ●VIERA Li

VIERA Link Control of compatible equipmentThe following is the maximum number of compatible equipment that can be controlled by VIERA Link Control.

Preparations ●Connect the equipment supporting VIERA Link. ●For details of VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summ

Easy playbackAutomatic input switching - When the connected equipment is operated, the input mode is switched automatically.- 249 -

To watch pay-TV ●For details of the encrypted channels Functions > Common Interface > Using Common Interface ●Consult the operator / broadcas

Power on LinkSet Power on Link to On in VIERA Link Settings to use this function.When the connected equipment is operated, the TV is automatically tur

Power off LinkSet Power off Link to On in VIERA Link Settings to use this function.When the TV is set to Standby mode, the connected equipment is also

Standby Power SaveSet Standby Power Save to On in VIERA Link Settings to use this function.The power consumption of the connected equipment in Standby

Intelligent Auto StandbySet Intelligent Auto Standby to On in VIERA Link Settings to use this function.When the TV is on, non-used connected equipment

VIERA Link ControlYou can control some functions of the connected equipment with this TV’s remote control by pointing at the TV’s signal receiver.1. D

= Note = ●If you cannot operate the equipment, check the settings and the equipment. Functions > VIERA Link “HDAVI Control™” > Summary of VIERA

Speaker SelectionYou can control the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver.1. Display APPS List with A

Note ●These functions may not work properly depending on the connected equipment. ●Image or sound may not be delivered for the first few seconds when

Child LockUsing Child LockYou can lock specific channels / AV input terminals to restrict access to them. When the locked channel / input is selected,

PIN numberYou can change the PIN number.1. Select Change PIN and press OK to access.2. Enter a new PIN number twice with Numeric buttons.= Note = ●Se

Information bannerDisplay information banner with . ●Also appears when changing a channel.(Example) Channel position and name Channel type (Radio,

Data Service ApplicationUsing Data Service ApplicationYou can enjoy Hybrid Broadcast Broadband TV application that is one of the interactive data serv

Cookie1. Display the menu with MENU.2. Select Setup > Data Service Application > Store Cookie / Delete Cookie and press OK to access.Store Cook

Note ●A broadband network environment is required to be able to use Hybrid Broadcast Broadband TV application fully. Ensure the network connections an

Common InterfaceCautionIf the encrypted message is displayed on the screen, the correct Common Interface (CI) Module and smart card that are required

Using Common InterfaceThe Common Interface Module menu provides access to software contained in Common Interface (CI) Modules. ●This function may not

Shipping ConditionShipping ConditionResets the TV to its original condition (i.e. no channels tuned in).All settings other than USB Device Setup are r

Updating the TV SoftwareInformationA new version of software may be released for download to enhance the performance or operations of the TV.If there

Auto updateYou can update new software automatically.1. Display the menu with MENU.2. Select Setup > System Menu > System Update > Auto Upda

Manual updateYou can update new software manually.1. Display the menu with MENU.2. Select Setup > System Menu > System Update > System Updat

Setting charactersUsing Numeric buttonsYou can enter characters for free input items using Numeric buttons.Press Numeric buttons repeatedly until you

:Teletext service available :Multiple audio available :Multiple video available :Multiple audio and video availableStereo, Mono:Audio mode :Data serv

Bluetooth devicesBluetooth SetupYou can use Bluetooth keyboards and mouse with this TV by setting Bluetooth Setup in the Setup Menu.: HID (Human Int

KeyboardKeyboard ●Keyboards requiring the drivers are not supported. ●To change the language type, set Keyboard Layout.1) Display the menu with MENU.

SettingsSetting menuHow to useVarious menus allow you to make settings for the picture, sound, and other functions.1. Display the menu with MENU. ●Di

●To exit the menu screenEXIT ●To return to the previous screenBACK/RETURN= Note = ●Menu items and selectable options vary depending on the mode (TV m

PictureViewing ModeSelects your favourite picture mode for each input.(Dynamic / Normal / Cinema / THX Cinema / THX Bright Room / True Cinema / Custom

Basic settingsLuminance Level, Contrast, Brightness, Colour, Tint, SharpnessAdjusts the levels of these options according to your personal preference.

Reversal Film Effect(Max / Min / Off)Provides the picture effect such as the reversal film for photo content. Watching > For best picture > Basi

Intelligent Frame Creation(Max / Mid / Min / Off)Automatically compensates the picture frame rate and removes juddering movements to make the images s

Ambient SensorAutomatic Brightness Control functionAdjusts picture settings automatically depending on ambient lighting condition.(On / Off) Watching

Noise reduction settingsNoise Reduction(Auto / Max / Mid / Min / Off)Reduces unwanted picture noise. Watching > For best picture > Noise reducti

●To display the introduction banner for the internet service1) Display the menu with MENU.2) Select Setup > Display Settings > Smart Banner an

Advanced SettingsYou can adjust and set up the detailed picture settings. Watching > For best picture > Advanced SettingsThis function is availa

Option SettingsGame Mode(On / Off)Provides suitable images for fast response signals when playing games. Watching > For best picture > Option Se

1080p Pixel by 4pixels(On / Off)Displays like pixel by pixel to make the image sharper for 1080p signal. Watching > For best picture > Option Se

Screen Settings16:9 Overscan(On / Off)Selects the screen area displaying the image for 16:9 aspect. Watching > For best picture > Screen Setting

3D Settings3D ModeSelects the 3D format manually. Watching > 3D > 3D Mode Selection2D→3DDepth(Max / Mid / Min)Selects a level of 3D-image depth

Lock SettingsLocks the settings of Professional1 / 2 for each input. Watching > For best picture > Lock Settings- 285 -

Copy AdjustmentCopies the picture settings of True Cinema, Custom, Professional1 or Professional2 to those of the other input mode or Viewing Mode. Wa

Reset to DefaultsResets the current Picture Viewing Mode to the default settings.- 287 -

SoundModeSelects your favourite sound mode for each input.(Standard / Music / Ambience / User) Watching > For best audio > Sound mode- 288 -

Basic settingsBassAdjusts level to enhance or minimise lower, deeper sound output. Watching > For best audio > Basic settingsTrebleAdjusts level

Option MenuConfirm or change the current status.1. Display the option menu with OPTION.2. Select one of the following items and press OK to access.V

Volume settingsSpeaker Setting(TV Speaker / Headphone / Off)Selects the sound output to adjust volume. Watching > For best audio > Volume settin

Voice Guidance SettingsVoice Guidance(On / Off)Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impair

Audio DescriptionPreferred Audio Type(Audio Description / Standard)Narration settings for visually impaired users Watching > For best audio > Au

Advanced settingsMPXSelects multiplex sound mode (if available). Watching > For best audio > Advanced settings ●For AnalogueAudio Preference(Aut

Reset to DefaultsResets the current Sound Mode to the default settings.- 294 -

NetworkNetwork ConnectionSets the network setting to use this TV in your network environment. Network > Network settings > Network Connection- 2

Network StatusDisplays and checks the network status (MAC Address, current network settings, etc.). Network > Network settings > Network Status-

VIERA NameSets your favourite name for this TV. Network > Network settings > VIERA Name- 297 -

TV Remote App SettingsSets to control the TV from network equipment (smartphone, etc.). Network > Network settings > TV Remote App Settings- 298

Network Link SettingsSets to control the TV with devices connected to the network. Network > Network settings > Network Link Settings- 299 -

- 3 -•HDMI features 50•HDMI HDR Setting 52•Terminal information 53•Valid input signals 55For best picture•Viewing Mode 56•Ambient Sensor 58•

Sub ChannelSelects the multifeed programme - sub channel (if available). ●For DVBSubtitle LanguageSelects the language for subtitles (if available). ●

DVB-via-IP Server SettingsSelects TV signal and enables tuning in DVB-via-IP server function. Functions > DVB-via-IP > DVB-via-IP Server Setting

TV Anywhere SettingsYou can set timer programming with the network equipment (smartphone, etc.) from outside the home network. Functions > TV Anywh

File Sharing SettingsFile Sharing Server(On / Off)Sets to share the files between PC and devices connected to this TV.Media Player > Using Media Pl

Mirroring SettingsSettings for the mirroring function Functions > Mirroring > Mirroring Settings- 303 -

Other settingsSoftware UpdateChecks for available software updates from the Panasonic website. Network > Network settings > Software UpdateNew S

TimerOff TimerSets the duration of time until the TV automatically goes into Standby mode.(90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)) Watching >

Timer ProgrammingSets a timer to record forthcoming programmes. Recording > Timer Programming > Setting Timer Programming ●For DVB- 306 -

Time ZoneAdjusts the time data. Watching > Basic > Adjusting time- 307 -

Auto StandbyAutomatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours.(On / Off) Watching > Basic >

No signal Power offAutomatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is

SubtitleDisplay / hide subtitles (if available) with STTL. ●To select the preferred language for DVB subtitles (if available), set Preferred Subtitles

SetupEco NavigationAutomatically sets the TV to the most suitable energy-saving mode. Watching > Basic > Energy saving functions- 310 -

Voice Control SettingsSettings for Voice Control function Functions > Voice Control > Settings- 311 -

USB Device SetupFormats the USB HDD or safely removes USB device. Recording > USB HDD setup > Setting for USB HDD- 312 -

Recording SetupSettings for the recording feature of the USB HDD Recording > Recording current programme > One Touch Recording- 313 -

VIERA Touch Pad ControllerPairingRegisters Touch Pad Controller (supplied) to this TV. Functions > Touch Pad Controller > PairingCursor Sensitiv

Bluetooth SetupSettings for the specific devices supporting Bluetooth wireless technology Functions > Bluetooth devices > Bluetooth Setup- 315 -

Child LockApplies access control for channels or inputs to prevent unwanted access. Functions > Child Lock > Using Child Lock- 316 -

Tuning MenuFavourites EditCreates a list of favourite channels. Watching > Tuning and editing channels > Favourites Edit ●Not valid in AnalogueC

Antenna System(One LNB / MiniDiSEqC / DiSEqC 1.0 / Single Cable)Sets the antenna system to use plural LNBs for receiving several satellites. Watching

LanguageOSD LanguageChanges language for on-screen displays. Watching > Basic > LanguagePreferred Audio 1 / 2Selects the first and second prefer

Last viewSwitch to a previously viewed channel or input mode easily with last view button. ●Press again to return to the current view.= Note = ●Switch

Display SettingsPreferred Subtitle Type(Standard / Hard of Hearing)Selects the preferred subtitle type. Watching > Basic > SubtitleTeletext(TOP

Playing Time Display(On / Off)Set to On to display a time period of continuous use in Game Mode on the top right of the screen every 30 minutes. Watch

HDCP SettingSelect a version of HDCP according to the content you watch.(Auto / 2.2 / 1.4) Watching > 4K resolution > HDCP Setting ●For HDMI- 32

HDMI Auto SettingSet to Mode1 when the image in HDMI input is not displayed properly.(Mode1 / Mode2) Watching > 4K resolution > HDMI Auto Settin

HDMI HDR SettingSet to On when the HDR device is connected to the TV.(On / Off) Watching > External equipment > HDMI HDR Setting ●For HDMI- 324

Common InterfaceSets to watch encrypted channels, etc. Functions > Common Interface > Using Common Interface- 325 -

VIERA Link SettingsVIERA Link(On / Off)Sets to use VIERA Link functions. Functions > VIERA Link “HDAVI Control™” > PreparationsPower on Link(On

Data Service ApplicationService(Auto Start On / Auto Start Off / Off)Sets to use Hybrid Broadcast Broadband TV application. ●Not all the data services

System MenuKeyboard LayoutSelects the language that your USB or Bluetooth Keyboard supports. Functions > Keyboard > KeyboardShipping ConditionRe

Other SettingsPower Save(On / Off)Reduces brightness of the picture to economise on power consumption.Exchange Channel ListExports / Imports DVB-S Cha

Off TimerTurn the TV Standby mode automatically after a fixed period.1. Display the menu with MENU.2. Select Timer > Off Timer and press OK to acc

SupportHelp menuUsing Help menu1. Display the menu with MENU.2. Select Help and press OK to access.3. Select TV Self Test / System Information / Devi

FAQsPictureBefore requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of picture problem

No image is displayed ●Check the correct input mode is selected. ●Check the setting of AV2 (COMPONENT / VIDEO) in Input Selection to match the signal

Digital TVBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contac

Faulty dish message appears ●The satellite cable may be short-circuited or there may be connection problems of the cable. Check the cable and connecti

Analogue TVBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please conta

SoundBefore requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of sound problem in TV Se

3DBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact your l

HDMIBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact your

NetworkBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact y

Energy saving functionsThe TV can be eco-friendly using energy-saving functions.The TV goes into Standby mode in the following conditions: ●Eco Naviga

Cannot operate internet content ●Check the connections and settings. Network > Network connections > Internet connection Network > Network se

OtherBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact you

Touch Pad Controller does not work or cannot be registered ●Are the batteries installed correctly? ●The batteries may be running low. Replace them wit

When pushed with a finger, the display panel moves slightly and makes a noise ●There is a little gap around the panel to prevent damage to the panel.

MaintenanceCare and CleaningFirst, remove the mains plug from the mains socket. Display panel, Cabinet, PedestalRegular care:Gently wipe the surface

Detachable back coverRegular care:Gently brush the surface using a soft cleaning brush or a dry soft cloth to clean the dust off.For dirt:Soak a so

Optional accessories3D Eyewear 3D Eyewear ●TY-EP3D20E(1 pack includes 2 pairs of eyewear)– If you need 3D Eyewear additionally, please purchase thi

Wall-hanging bracket Wall-hanging bracket ●Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.= Warning = ●

LicenceLicenceEven if no special notation has been made of company or product trademarks, these trademarks have been fully respected.DVB and the DVB l

Speech Powered by Dragon2002-2015 Nuance Communications, Inc. All rights reserved.“PlayReady” is a trademark registered by Microsoft. Please be aware

No signal Power off1. Display the menu with MENU.2. Select Timer > No signal Power off and press OK to access.3. Select On / Off and press OK t

This product incorporates the following software:(1) the software developed independently by or for Panasonic Corporation,(2) the software owned by th

Ver.1.00

Adjusting timeAdjusts the time data.1. Display the menu with MENU.2. Select Timer > Time Zone and press OK to access.3. Set the item and press OK

Language1. Display the menu with MENU.2. Select Setup > Language and press OK to access.3. Select one of the following items and press OK to acce

4K resolution4K compatible equipmentYou can watch content in 4K format that has twice the horizontal and vertical resolution of the 1080p signal. ●For

HDCP Setting1. Display the menu with MENU.2. Select Setup > HDCP Setting and press OK to access.3. Set the item and press OK to store.HDCP Settin

- 4 -•Viewing 3D 96•3D Mode Selection 98•3D Settings 99•Source image format 101Tuning and editing channels•Setting menu 102•Favourites Edit 1

HDMI Auto Setting1. Display the menu with MENU.2. Select Setup > HDMI Auto Setting and press OK to access.3. Set the item and press OK to store.H

Valid 4K format Valid 4K format (HDMI) ●4K UHD3 840 × 2 160 (60p, 50p, 30p, 25p, 24p)– Aspect is fixed to 16:9. ●DCI 4K4 096 × 2 160 (60p, 50p, 30p

External equipmentExternal connectionThese diagrams show our recommendations for connection of your TV to various pieces of equipment. For other conne

AV devices AV2 (COMPONENT) terminals Component cables– AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary when connecting to the TV. DVD P

USB devices USB port USB cable USB HDD, etc.= Note = ●It is recommended to connect the device to the TV’s USB port directly. ●You cannot use two

Headphones Headphone jack M3 stereo mini plug Headphones ●To adjust volume, set Headphone Volume. Watching > For best audio > Volume settin

Watching external inputConnect the external equipment (VCR, DVD, etc.) and you can watch through the input.1. Display the input selection menu with A

Input LabelsAccesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and sele

Operating with TV’s remote controlYou can operate the content in Media Player / media server, recording functions or the connected equipment with the

How to change the codeEach Panasonic product has its own remote control code. Change the code according to the product for operation.1. Press and

- 5 -Media PlayerUsing Media Player•Information 132•Selecting device / mode 134•Network device 136•Sharing file 137Photo mode•Selecting file

HDMI featuresHDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression

DVI connectionIf the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When using the DVI to

HDMI HDR Setting1. Display the menu with MENU.2. Select Setup > HDMI HDR Setting and press OK to access.3. Set the item and press OK to store.HDM

Terminal information AV1 (SCART) terminal (RGB, VIDEO)1 : Audio out (R)2 : Audio in (R)3 : Audio out (L)4 : Audio earth5 : Blue earth6 : Audio in (L

HDMI terminal1 : TMDS Data2+2 : TMDS Data2 Shield3 : TMDSData2−4 : TMDS Data1+5 : TMDS Data1 Shield6 : TMDSData1−7 : TMDS Data0+8 : TMDS Data0 Sh

Valid input signals COMPONENT, HDMISignal name COMPONENT HDMI525 (480) / 60i, 60p ○ ○625 (576) / 50i, 50p ○ ○750 (720) / 60p, 50p ○ ○1 125 (1 080) /

For best pictureViewing Mode1. Display the menu with MENU.2. Select Picture > Viewing Mode and press OK to access.3. Select the mode and press OK

●The following items can be adjusted and stored for each mode.Luminance Level / Contrast / Brightness / Colour / Tint / Sharpness / Colour Temperatur

Ambient Sensor1. Display the menu with MENU.2. Select Picture > Ambient Sensor and press OK to access.3. Select On / Off and press OK to set.Ambie

AspectChange the aspect ratio (image size) with ASPECT. To change the aspect ratio manually1. Display Aspect Selection with ASPECT.2. Select the mo

- 6 -•Music format 167NetworkInternet content•Information 168•Selecting internet content 169•Note 170DLNA•In-House streaming 171•Using DLNA

= Note = ●Display the image (TV, external input, etc.) full-screen to use this function completely. ●Aspect mode can be memorised separately for SD (S

Aspect Control SignalProgrammes usually contain an “Aspect Control Signal”. (Widescreen signal, Control signal through SCART / HDMI terminal)In Auto m

●AV1 (SCART) terminal / AV2 (VIDEO) terminalsValid input signal format:PALSECAMPAL 525/60M.NTSCNTSC: Control signal through SCART (pin 8) / HDMI term

Basic settings1. Display the menu with MENU.2. Select Picture and press OK to access.3. Select one of the following items and press OK to access.Lum

Reversal Film Effect(Max / Min / Off)Provides the picture effect such as the reversal film for photo content. ●For photo content ●Not valid when Viewi

24p Smooth Film(Max / Mid / Min / Off)Automatically compensates the picture frame rate to make the 24p source movie images smooth. ●This function is a

Noise reduction settings1. Display the menu with MENU.2. Select Picture > Noise Reduction / MPEG Remaster and press OK to access.3. Set the item

Advanced SettingsYou can adjust and set up the detailed picture settings when Viewing Mode is set to Cinema, True Cinema, Custom or Professional1 / 2.

Colour GamutColour Gamut(Native / Rec. 709 / SMPTE-C / EBU)Reproduces image colour precisely according to the colour gamut standards.Native:Display

Colour ManagementR-Hue / R-Saturation / R-LuminanceAdjusts the picture hue / saturation / luminance of red areas.G-Hue / G-Saturation / G-Luminance

- 7 -Videos•Selecting file 203•Watching video 204•Video Setup 206•Audio output settings 208Music•Selecting file 209•Playing music 210•Musi

GammaGammaSwitches the gamma curve. ●Please note the numerical values are reference for the adjustment.More Detailed AdjustmentAdjusts more detaile

Option Settings1. Display the menu with MENU.2. Select Picture > Option Settings and press OK to access.3. Select one of the following items and

4K Pure Direct(On / Off)Reproduces the original image quality in detail for 4K (HDMI) input signal. ●Not valid in the following conditions:– 3D– Mul

AV Colour System(Auto / PAL / SECAM / M.NTSC / NTSC)Selects optional colour system based on video signals. ●For AV3D-COMB(On / Off)Makes still or slow

Screen Settings1. Display the menu with MENU.2. Select Picture > Screen Settings and press OK to access.3. Select one of the following items and

Screen Display(On / Off)Turns the screen off when you select Off. ●This function is effective in reducing power consumption when listening to the soun

Lock SettingsLocks the settings of Professional1 / 2 for each input. ●Select Professional1 / Professional2 in Viewing Mode in advance. Watching > F

Copy AdjustmentCopies the picture settings of True Cinema, Custom, Professional1 or Professional2 to those of the other input mode or Viewing Mode.1.

For best audioSound mode1. Display the menu with MENU.2. Select Sound > Mode and press OK to access.3. Select the mode and press OK to set.Mode(S

Basic settings1. Display the menu with MENU.2. Select Sound and press OK to access.3. Select one of the following items and press OK to access.Bass

- 8 -•Mirroring Settings 231DVB-via-IP•DVB-via-IP server connection 232•DVB-via-IP Server Settings 234•DVB-via-IP client connection 235•DVB-via

Surround(Diffuse Surround / Virtual Surround / Off)Selects surround sound settings.Diffuse Surround:Provides a more progressive enhancer and reverbera

Volume settings1. Display the menu with MENU.2. Select Sound and press OK to access.3. Select one of the following items and press OK to access.Spea

Voice Guidance Settings1. Display the menu with MENU.2. Select Sound > Voice Guidance Settings and press OK to access.3. Select one of the follow

= Note = ●Voice guidance function may not correspond exactly.- 83 -

Audio Description1. Display the menu with MENU.2. Select Sound > Audio Description and press OK to access.3. Select one of the following items an

Advanced settings1. Display the menu with MENU.2. Select Sound and press OK to access.3. Select one of the following items and press OK to access.MP

●For DVBSPDIF Selection(Auto / PCM)Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.

TV GuideUsing TV GuideTV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcom

●To the next day (green) ●To view a channel list of the selected type1) Display the type list with (yellow).2) Select the type and press OK to vie

Timer ProgrammingThis function allows you to select programmes that you want to record to the USB HDD.1. Display TV Guide with GUIDE.2. Select the fo

- 9 -Shipping Condition•Shipping Condition 265Updating the TV Software•Information 266•Auto update 267•Manual update 268Setting characters•Usin

TeletextViewing Teletext1. Switch to teletext with TEXT. ●Displays the index page (content varies depending on the broadcaster). ●Current / sub page

Watch TV and teletext in two windows at once1. Press MENU twice.2. Set Picture and text to On / Off. ●Operations can be made only in teletext scree

Teletext modeTeletext services are the text information provided by the broadcaster. ●The features may vary depending on the broadcaster.1. Display t

Teletext Character SetSelects teletext language font.1. Display the menu with MENU.2. Select Setup > Display Settings > Teletext Character Set

3DNote ●Display the image (TV, external input, etc.) full-screen for viewing 3D. ●Do not apply pressure on or scratch the lens of the 3D Eyewear. ●3D

3D Eyewear - Maintenance Storing and cleaning the 3D Eyewear ●Store the 3D Eyewear in a cool, dry place. ●Clean using a soft, dry cloth.– Wiping th

Viewing 3DYou can enjoy viewing 3D images of content or programmes supporting 3D effects by wearing the 3D Eyewear. ●This TV supports Frame Sequential

2D images converted to 3D ●Set to 2D→3D mode in 3D Mode Selection. Watching > 3D > 3D Mode Selection ●Content in 4K format cannot be converte

3D Mode SelectionYou can change the viewing mode for 3D image.1. Display the menu with MENU.2. Select Picture > 3D Settings > 3D Mode and press

3D Settings1. Display the menu with MENU.2. Select Picture > 3D Settings and press OK to access.3. Select one of the following items and press OK