Panasonic DMRHWT150EB User Manual download pdf (Page 69)

Troubleshooting

SQT0993

69

• Picture may not be seen when more than

4 devices are connected with HDMI cables.

Reduce the number of connected devices.

• The picture may be distorted or a black screen

may appear between scenes recorded with

different aspect ratios.

• Set “Deep Colour Output” (> 61) or “Contents

Type Flag” (> 61) to “Off”.

3D video is not output correctly.

• 3D video may be output correctly by changing

the following settings:

- “3D Type” of “3D Settings” (> 61)

- “Signal Format” (> 36, 3D settings during

playback)

• Check the settings of the connected TV.

• When a non-3D compatible amplifier/receiver is

connected between this unit and a TV, 3D video

is not output. (> 13)

• [HWT250] When “HDMI Audio Output” is set to

“Off”, 3D video may not be output correctly.

(> 61)

No sound.

Distorted sound.

• Check the connections. (> 12)

• Check the settings of the connected TV, etc.

• Select the audio with “Multi Audio”. (> 19, 35)

• [HWT250] To output audio from a device

connected with an HDMI cable, set “HDMI Audio

Output” to “On”. (> 61)

Cannot change audio channel.

• You cannot change the audio channel if “Digital

Audio Output” is set to “Bitstream” (> 60)

Cannot record.

Cannot copy.

• Some broadcasts are copyright protected.

The images do not appear on the TV.

The picture is distorted during play, or video

is not played correctly.

• Check the connections. (> 12)

• Check the settings of the connected TV, etc.

• An incorrect resolution is selected in “HDMI

Video Format”. (> 61) Reset the setting as

follows:

1 While the unit is on, press and hold [OK], the

yellow button and the blue button at the

same time for more than 5 seconds.

• The "INFO1" indicator on the unit will flash.

2Press [1] repeatedly until the "REC" and

"INFO2" indicators on this unit start flashing.

3 Press and hold [OK] for at least 3 seconds.

Set the item again.

Sound

Recording, timer recording and

copying

Timer recording does not work properly.

• When is displayed on the screen. (> 30)

• Because the actual broadcast time may be

different from the time displayed on the TV

Guide, we recommend you set the start time

earlier and the end time later by some minutes,

up to a maximum of 10 minutes.

DMR-HWT250_150EB_eng.book 69 ページ２０１５年９月１４日　月曜日　午後１時５０分

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Comments to this Manuals

No comments