Panasonic NNSD25HB Operations Instructions download pdf (Page 11)

10

11

11

Important

It is essential for the safe operation

of the oven that it is kept clean, and

wiped out after each use. Failure

to maintain the oven in a clean

condition could lead to deterioration

of a surface that could adversely

affect the life of the appliance and

possibly result in a hazardous

situation.

1. Switch the oven off before cleaning

and unplug at socket if possible.

2. Keep the inside of the oven, door

seals and door seal areas clean.

When food splatters or spilled liquids

adhere to oven walls, door seals

and door seal areas wipe off with a

damp cloth. Mild detergent may be

used if they get very dirty. The use

of harsh detergent or abrasives is

not recommended. Take care when

cleaning around the waveguide cover.

3. Your oven cavity is constructed of zinc

coated steel, painted with an extremely

durable coating. After use, the oven

interior should be wiped out to remove

any remaining water in order to reduce

the risk of corrosion to the cavity and

door.

The cavity and door can be damaged

by abrasive cleaners and sharp objects

so care must be taken to avoid damage

caused in this way. If the cavity or

door become damaged the lining may

begin to corrode. Providing the above

precautions are taken regarding the

cleaning and care of your oven the life

of the cavity and door may be extended.

4. The outside oven surface should be

cleaned with a damp cloth. To prevent

damage to the operating parts inside

the oven, water should not be allowed to

seep into the ventilation openings.

5. If the control panel becomes dirty,

clean with a soft, dry cloth. Do not use

harsh detergents or abrasives on control

panel. When cleaning the control panel,

leave the oven door open to prevent the

oven from accidentally turning on. After

cleaning press Stop/Cancel button to

clear display window.

6. Do not use harsh abrasive cleaners or

sharp metal scrapers to clean the oven

door glass since they can scratch the

surface, which may result in shattering

of the glass.

7. Keep air vents clear at all times.

Check that no dust or other material is

blocking any of the air vents on the top,

bottom or rear of the oven.

If air vents become blocked this could

cause overheating which would affect

the operation of the oven and possibly

result in a hazardous situation.

8. If steam accumulates inside or around

the outside of the oven door, wipe with

a soft cloth. This may occur when the

microwave oven is operated under

high humidity conditions and in no way

indicates a malfunction of the unit or

microwave leakage.

9. It is occasionally necessary to remove

the glass turntable for cleaning. Wash

the glass turntable in warm soapy water.

10. The roller ring and oven cavity oor

should be cleaned regularly to avoid

excessive noise. Simply wipe the

bottom surface of the oven with mild

detergent and hot water then dry with

a clean cloth. The roller ring may be

washed in mild soapy water.

After removing the roller ring from cavity

oor for cleaning, be sure to replace it in

the proper position.

11. A steam cleaner is not to be used for

cleaning.

12. Users are advised to avoid any

downward pressure on the microwave

door when in the open position. There

is a safety risk that the oven will tilt

forward.

Care & Cleaning of Your Oven

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

Comments to this Manuals

No comments