Panasonic EY7549 Operations Instructions download pdf (Page 10)

-

10

-

WARNING

• Do not use other than the Panasonic

battery packs that are designed for

use with this rechargeable tool.

• Panasonic is not responsible for any

damage or accident caused by the

use of the recycled battery pack and

the counterfeit battery pack.

• Do not dispose of the battery pack in

a fire, or expose it to excessive heat.

• Do not drive the likes of nails into the

battery pack, subject it to shocks, dis-

mantle it, or attempt to modify it.

• Do not allow metal objects to touch

the battery pack terminals.

• Do not carry or store the battery pack

in the same container as nails or simi-

lar metal objects.

• Do not charge the battery pack in

a high-temperature location, such

as next to a fire or in direct sunlight.

Otherwise, the battery may overheat,

catch fire, or explode.

• Never use other than the dedicated

charger to charge the battery pack.

Otherwise, the battery may leak,

overheat, or explode.

• After removing the battery pack from

the tool or the charger, always reat-

tach the pack cover. Otherwise, the

battery contacts could be shorted,

leading to a rick of the fire.

• When the Battery Pack Has

Deteriorated, Replace It with a New

One.

Continued use of a damaged battery

pack may result in heat generation,

ignition or battery rupture.

III. ASSEMBLY

Using Keyless drill chuck

(EY9X003E)

CAUTION: • Use keyless drill chuck ONLY

in Drill Driver Mode.

This chuck is not designed to

be used in IMPACT MODE.

It can be damaged and its life

will be reduced. Moreover,

the chuck and its metal parts,

such as the push button, front

parts, and bit may become

very hot. To prevent skin

burns, use work gloves and/

or allow heated parts to cool

down before handling.

•

Make sure the work envi-

ronment is safe. When

retracting drill from work

material, Keyless drill chuck

may detach if subjected to

100 kg or more of pull force.

Detachment will be sudden.

Use care and avoid excessive

force when retracting drill from

work material.

1. Attaching Keyless drill chuck

Attach the chuck by sliding the female

detent on the bottom of the chuck to

the square drive on the body.

Make sure the chuck is firmly connect-

ed to the body.

2. Inserting the bit

Insert the bit, and turn the lock collar

clockwise(looking from the front) hold-

ing the sleeve until jaws close firmly.

①

②

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 139 140

Comments to this Manuals

No comments