Panasonic EY7549 Operations Instructions download pdf (Page 16)

-

16

-

The life of the battery pack terminals

may be affected by foreign substances

such as dust and water etc. during

operation.

• When battery pack is not in use,

keep it away from other metal objects

like: paper clips, coins, keys, nails,

screws, or other small metal objects

that can make a connection from one

terminal to another.

Shorting the battery terminals togeth-

er may cause sparks, burns or a fire.

• When operating the battery pack,

make sure the work place is well ven-

tilated.

• When the battery pack is removed

from the main body of the tool, replace

the battery pack cover immediately in

order to prevent dust or dirt from con-

taminating the battery terminals and

causing a short circuit.

Battery Pack Life

The rechargeable batteries have a

limited life. If the operation time be-

comes extremely short after recharg-

ing, replace the battery pack with a

new one.

Battery Recycling

ATTENTION:

For environmental protection and

recycling of materials, be sure

that it is disposed of at an officially

assigned location, if there is one in

your country.

[Battery Charger]

Charging

CAUTION:

• If the temperature of the battery pack

falls approximately below −10°C

(14°F), charg ing will automatically stop

to prevent degradation of the battery.

indicates that there is too little bat-

tery power remaining to use the

tool, and the battery pack should be

charged before further use.

• If the tool is subject to a sudden

load during use that causes the

motor to lock up, the overdischarge

prevention sensor may be trig-

gered, and the battery low warn-

ing lamp may flash. The lamp will

stop flashing once you address the

cause of the motor’s locking up and

cycle the trigger.

• The battery protection feature

may activate when a high load is

abruptly placed on the motor, even

if ample battery charge remains.

In this case, both the battery low

warning lamp and LED light will

flash.

• If both the battery low warning lamp

and LED light flash, reduce the

force with which you are pushing on

the driver or, if using a drill driver,

adjust the speed switch to a lower

setting.

[Battery Pack]

For Appropriate Use of

Bat tery pack

Li-ion Battery pack

• For optimum battery life, store the Li-

ion battery pack following use without

charging it.

• When charging the battery pack, con-

firm that the terminals on the bat-

tery charger are free of foreign sub-

stances such as dust and water etc.

Clean the terminals before charging

the battery pack if any foreign sub-

stances are found on the terminals.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 139 140

Comments to this Manuals

No comments