Operating InstructionsElectronic BoardModel No. UB-5838CUB-5338CThe unit in this picture is UB-5838C.(Stand kit is optional.)[Stand (option)] [Wall-mo
For Your Safety10PowerInstallation and RelocationOperating SafeguardsBatteryWhen the unit is not used over an extended period of time, switch it Off a
For Your Safety11Before You StartThis appliance is supplied with a moulded three pin mains plug for your safety and convenience.A 5 amp. fuse is fitte
12PrecautionsInstallation • Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents
Precautions13Before You StartBattery If a battery is used improperly, the battery may leak, causing corrosion of the unit, or it may burst. To prevent
14Part Names and FunctionsOFFONScreen FilmFrameTrayStandCasterCasterwith LockScannerControl BoxStandControl PanelPower CordBattery HolderAC InletPower
Part Names and Functions15Before You StartControl PanelName DescriptionDisplayWhen in standby mode, the display shows the current status of the unit a
16Before UsingThis unit has the following functions concerning information security. Please use them properly. Operation Password functionIt is possi
17UsingScanningIt is possible to output scanned images to a USB flash memory device, SD memory card, external printer, or computer.If multiple output
Scanning181Set the power switch to on ( I ).2Connect the USB flash memory device to “USB Connector-A for USB Flash Memory Device”.• When the USB flash
Scanning19Using1Set the power switch to on ( I ).2Open the SD memory card cover and insert the SD memory card into the SD memory card slot until it is
2Thank you for purchasing the Panasonic Electronic Board.For optimum performance and safety, please read these instructions carefully.*1For U.S.A. mod
Scanning206Press the Mode Key ( ).• The Screen Erase Announce is shown on the display.7After erasing the written text/diagrams on the screen, press th
Scanning21Using6Press the Start/Stop Key.• The unit starts scanning and the image is printed.• The copying status is shown on the display.• After prin
Scanning22Note• The use of a USB hub is not recommended. We cannot guarantee that the unit will work properly.• Do not connect two or more Panasonic e
23UsingMoving the Electronic Board1Make sure that the power switch is set to off ( ), and disconnect the power cord on both ends.• Make sure if there
24Setting the UnitThe following settings can be made using the control panel.Note• The item “Setting the number of copies” is displayed at the top of
Setting the Unit25Using3Press the Advance Key ( ) repeatedly to select (On) or (Off).• When the scanning time display is set to “off”, the followi
Setting the Unit26When images are scanned in full size mode, they are stretched and enlarged in order to utilize the entire space of a page.1Press the
Setting the Unit27UsingTo prevent third parties from operating the unit, it is possible to set the unit to require a password to be entered when the p
Setting the Unit28By performing the Test Print feature, it is possible to clean the printer head from this unit when scanned images are not printed co
29HelpDaily Care and MaintenanceAlways turn off the power switch and unplug the power plug when cleaning the unit.Gently wipe the screen film and unit
3Federal Communications Commission Requirements(For United States only)Note: This equipment has been tested and found to comply with the limits for a
Daily Care and Maintenance30When the clock battery has been drained, the time set-up screen is displayed each time the unit’s power is turned on.Repla
31HelpTroubleshootingTo identify error message that are displayed on the control panel, refer to “Error Codes” on page 33.The following table lists so
Troubleshooting32Issue Solution and CareSee PageThe USB flash memory device, SD memory card, or printer is not recognized.The USB flash memory device,
Troubleshooting33HelpThe following table describes the meaning of each error code which may appear on the display.Error CodesError Code Cause RemedySe
Troubleshooting34Error Code Cause RemedySee PageU307144 USB flash memory device writing error occurred.Check whether the USB flash memory device is wr
Troubleshooting35HelpIf other indications appear, call your dealer.Error Code Cause RemedySee PageU306001U306002SDHC memory card is connected. SDHC me
36SpecificationsModel No. UB-5838C UB-5338CGeneralPower supply Refer to the name plate underside of the left lower framePower consumption Refer to the
Specifications37HelpThe printers are not included in the above specifications.For information regarding available USB flash memory devices, SD memory
38Installation Manual(for qualified service personnel)Table of ContentspageFor Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39InstallationFor Your SafetyTo prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe op
4Illegal DuplicationIt is unlawful to make duplication of certain documents.Duplicating certain documents may be illegal in your country.Penalties of
40Assembling the unit Accessories for assemblingThe package includes the parts for setting up the unit shown below. Make sure that all of these parts
Assembling the unit41Installation Assembly1Assemble the wall-mounting fixture or optional stand.• If you are using a wall-mounting fixture, refer to
Assembling the unit423Collapse the carton box.4Remove the protective plastic bag and lay down the unit onto the shipping box with the screen film surf
Assembling the unit43Installation7After unscrew the 4 screws from the lower center frame cover, remove it.8Fasten the wall-mounting clasps of the unit
Assembling the unit4411Stand the unit up.12Attach the rivets (included in the stand) to the holes in the stand that are not already in use.• normal he
45InstallationElectronic Board Operations Check Before Operation Check1Wipe the screen film surface.• Soak a soft cloth with water, wring well, and w
Electronic Board Operations Check46 Operation Check ProcedureAfter assembling the unit and setting the time, perform the procedures presented in the
47InstallationRepackingPerform Assembly Steps 2 through 13 on pages 41 - 44 in reverse to repack the unit and accessories. Use the joints to fasten th
48Wall-Mounting Construction Checking the WallWhen mounting on a wall, consult with your building’s owner, caretaker or construction manager to deter
Wall-Mounting Construction49Installation Installing the Wall-Mounting Fixtures1Ensure that the wall is strong enough to support the unit.For UB-5838C
5Trademarks• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
Wall-Mounting Construction504Install the wall-mounting fixtures using the 4 screws.• 2 screws are used for each wall-mounting plate.The remaining 4 sc
Wall-Mounting Construction51Installation Wall Types and Installation ProceduresThe method for attaching the wall-mounting fixtures to the wall will v
Wall-Mounting Construction52● Plasterboard wallsSplit-wing toggles (sold in stores) are needed.● Wooden wallsWood screws (sold in stores) are needed.I
53InstallationOptional Stand Assembly (UE-608035) Included PartsCheck that the following parts are included with the optional stand (UE-608035).*1Use
Optional Stand Assembly (UE-608035)54 Assembly Instructions1Assemble the fall-prevention extension legs.2Assembling the standLocking casters side (re
Optional Stand Assembly (UE-608035)55Installation3Pull the fall-prevention extension legs down.Note• When folding back the fall-prevention extension l
Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols on the products, packaging, and/or accompanying docu
6FeaturesThe UB-5838C / UB-5338C is a color electronic board. It is possible to output scanned hand-written text/diagrams as follows: Storing on a US
7UsingInstallationBefore You StartHelpTable of ContentsPageBefore You StartFor Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8For Your SafetyTo prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe operation of yo
For Your Safety9Before You StartInstallation and RelocationOperating SafeguardsBatteryDo not attempt to repair the power cord or plug. If the power co
Comments to this Manuals