Panasonic PT-DZ6710 User Manual download pdf (Page 43)

Technical Information

ENGLISH - 43

Appendix

J STATUS

Q Projector status

Click the Projector status tab on the top.

Error information

When Error (Detail) is displayed in SELF TEST in the

status list, click

(Detail) to display the error details.

PROJECTOR TYPE Displays the type of projector.

MAIN VERSION

Displays the firmware version of the

projector main unit.

INPUT Displays the input switching status.

INPUT AIR

TEMPERATURE

Displays temperature of projector’s

intake air.

OPTICS MODULE

TEMPERATURE

Displays temperature inside the

projector.

AROUND LAMP

TEMPERATURE

Displays temperature around lamp

units.

LAMP1 RUNTIME/LAMP2

RUNTIME

Displays the lamp lit hours.

PROJECTOR RUNTIME Displays used hours of the projector.

SELF TEST Displays self diagnosis information.

Click (Detail)

Parameter Description

MAIN CPU BUS

Trouble has occurred in the

microcomputer circuitry. Consult your

dealer.

FAN

Trouble has occurred in the fan or its

drive circuit. Consult your dealer.

INPUT AIR

TEMPERATURE

The input air temperature is too high. It

may be that the projector is being used

in an operating environment where the

temperature is high such as near a

heating appliance.

OPTICS MODULE

TEMPERATURE

The temperature inside the projector is

high. It may be that the projector is

being used in an operating

environment where the temperature is

high such as near a heating appliance.

AROUND LAMP

TEMPERATURE

The temperature around the lamp is

too high. It may be that the projector’s

ventilation holes are blocked.

LAMP1 REMAIN TIME The lamp runtime has exceeded the

prescribed cumulative time, and it is

now time to replace the lamp.

LAMP2 REMAIN TIME

LAMP1 STATUS The lamp has failed to light. Wait a

short while for the lamp to cool off, and

then turn on the power.

LAMP2 STATUS

SHUTTER

Trouble has occurred in the shutter

circuitry. Consult your dealer.

INPUT AIR TEMP.SENSOR

Trouble has occurred in the sensor

used to detect the input air

temperature. Consult your dealer.

OPTICS MODULE

TEMP.SENSOR

Trouble has occurred in the

temperature detection sensor inside

the projector. Consult your dealer.

AROUND LAMP

TEMP.SENSOR

Trouble has occurred in the sensor

used to detect the exhaust air

temperature. Consult your dealer.

BATTERY

The backup battery has been run out.

Consult your dealer.

AIRFLOW SENSOR

Trouble has occurred in the sensor

used to detect the airflow volume.

Consult your dealer.

COLOR WHEEL

Trouble has occured in the colour

wheel or colour wheel or its drive

circuit. Consult your dealer.

COVER OPEN

The lamp unit cover is not attached

securely. Check the lamp unit

compartment.

ACF UNIT

The air cleaning filter (ACF) is not

installed or trouble has occurred. See

the operating instructions booklet that

is provided with the projector.

FILTER REMAIN

The filter remaining is getting less. See

the operating instructions booklet that

is provided with the projector.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Comments to this Manuals

No comments