Panasonic KX-TS4200B Operations Instructions download pdf (Page 12)

Preparation

12

For assistance, please visit http://www.panasonic.com/phonehelp

Battery installation

Install a 9 V Alkaline (6LR61) battery

(sold separately) in the battery

compartment. It works as emergency

power during a power failure. The unit

will work as a standard telephone, so

that you can make or answer outside

calls with the handset. (You cannot use

the speakerphone, intercom, etc.)

1 Open the battery cover by sliding in

the direction of arrow (1), and take

out the battery snap (2).

2 Match the polarity and snap the

battery to the battery snap as shown.

3 Place the battery into the battery

compartment.

4 Dress the battery snap wire, and

close the battery cover.

N

o

t

e:

L Please refer to “Battery” on page 7 for

correct battery usage.

L When the display shows “LOW BATT”

with a 9 V battery in the unit, the

battery needs to be changed

immediately. If the battery level is too

low, all LEDs might light up or flash

and the unit is not guaranteed to

perform as normal during a power

failure. Replacing with a fresh battery

will restore normal function.

L The Manganese (6F22) battery can be

used but operating time when using it

will be dramatically shortened.

L It is recommended that the battery is

replaced annually.

L It is recommended that the battery is

replaced after a power outage.

L The battery operating time may

depend on usage conditions, ambient

temperature, and battery quality.

L During a power failure the battery will

retain the clock memory (see “Date

and time” on page 24) and the redial

memory (see “Making a call using the

redial list” on page 25). If you do not

install the battery, the data in memory

will be lost during a power failure.

L When storing or disposing of the

battery, please cover the positive (S)

and negative (T) terminals with tape.

Battery replacement

Disconnect the telephone line cord(s)

before opening the battery cover.

N

o

t

e:

L You do not need to disconnect the AC

adaptor, otherwise the clock memory

and the redial memory will be lost.

L Please refer to “Battery” on page 7 for

correct battery usage.

Battery life

The battery works as emergency power

during a power failure.

Please remove the battery when you

cut the power supply, as the battery

will discharge automatically once the

power is cut according to the time as

follows.

Operation

Operating time

(for a Panasonic

Alkaline battery)

While in use

(talking)

Approx. 3 hours

While not in

use (standby)

Approx. 4 hours

KXT4200_OI.book Page 12 Friday, September 1, 2006 8:53 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Comments to this Manuals

No comments