Panasonic KXTD816SL Operations Instructions download pdf (Page 51)

Station Programming 2-27

2.2 Programming

One-Touch Dialing Button (Assignment)

Allows you to assign a Flexible (CO, DSS, PF) button as a One-Touch Dialing button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS, PF) button which you wish to

assign as a One-Touch Dialing button.

2. Dial 2.

• The display shows:

3. Enter the desired number (an extension number or a phone number,

etc.).

• Up to 16 digits can be stored.

• To erase an incorrect entry, press the CLR (S2) button or the

TRANSFER (CLEAR) button.

(The TRANSFER ( ) button becomes the CLEAR button when using the

overlay.)

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Conditions

• The number can be an extension number, a telephone number, or a feature number. Up to

sixteen digits can be stored on a One-Touch Dialing button.

• To store the telephone number of an outside party, the line access code (0, or 81 through 88)

must be stored as the leading digit.

• You can store a number consisting of seventeen digits or more by dividing it and assigning it

in two One-Touch Dialing buttons. In this case, the line access code should not be stored on

the second button.

• You can use 0 through 9, , #, PAUSE ( ), FLASH ( ), CONF ( ) and INTERCOM

(INT) for storing:

#: change the dialing mode (Pulse to Tone)

FLASH ( ): Flash

PAUSE ( ): pause

CONF ( ): — (hyphen)

INTERCOM (INT): for secret dialing

...

desired number

CLR

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 402 403

No comments

Panasonic KXTD816SL Operations Instructions Page 51