Panasonic HDCSD1 Operations Instructions download pdf (Page 25)

25

VQT1D38

Setup

Setup

Charging the battery

When this unit is purchased, the battery is not

charged. Charge the battery before using this

unit.

≥Connect the battery to an AC adaptor to

recharge it.

The battery cannot be recharged by simply

inserting it into the unit.

≥If the DC cable is connected to the AC

adaptor, then the battery will not charge.

Remove the DC cable from the AC adaptor.

≥The Panasonic battery that can be used

with this unit is VW-VBG130. Other

Panasonic batteries will not work. (l 27)

1 Connect the AC cable to the AC

adaptor and the AC outlet.

≥Remove the DC cable beforehand.

2 Put the battery on the battery

mount by aligning the mark, and

then securely plug it in.

≥The output plug of the AC cable is not

completely connected to the AC adaptor

socket. As shown in A, there is a gap.

ª Charging lamp

Lights up: Charging

Goes off: Charging completed

Flashing: Make sure that the terminals of the

battery or the AC adaptor are not

exposed to dirt, foreign objects or

dust, then reconnect them properly.

Disconnect the AC cable from the AC

outlet when you remove dirt, foreign

objects or dust on the terminals of the

battery or the AC adaptor.

If the charging lamp is still flashing,

something may be wrong with the

battery or AC adaptor. Contact your

dealer.

≥Battery charging time (l 27)

≥We recommend using Panasonic batteries

(VW-VBG130).

≥If you use other batteries, we cannot guarantee

the quality of this product.

A

VQT1D38_EG_ENG.book 25 ページ２００７年１月２７日　土曜日　午後３時１７分

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 127 128

Comments to this Manuals

No comments