Panasonic HDCSD1 Operations Instructions download pdf (Page 99)

99

VQT1D38

With a computer

1 Double click the icon in task

tray displayed on the computer.

Hardware disconnect dialogue appears.

≥Depending on your computer’s settings,

this icon may not be displayed.

2 Select [USB Mass Storage

Device] and click [Stop].

3

Verify [MATSHITA HDC-SD1 USB

Device] is selected and click [OK].

Click [Close], and you can safely disconnect

the cable.

≥Do not disconnect the USB cable while the card

access lamp lights ( appears on the LCD

monitor) as it may damage the data.

To verify this unit is correctly recognised by the

computer, rotate the mode dial on this unit to

select PC connection mode, then connect the

unit to the computer with a USB cable and follow

the steps below.

≥With some computers including those made by

NEC, the Device Manager may not be

displayed if a mode that places restrictions on

the functions has been established. Consult the

manufacturer or follow the steps in your

computer’s operating instructions to establish a

mode in which all the functions can be used,

then proceed with operation.

1 Select [start] # ([Settings] #)

[Control Panel]

# ([Performance

and Maintenance]

#) [System].

2 Click the [Hardware] tab, then

click [Device Manager].

3 Verify the following items are

displayed.

ª If the driver has been recognised

properly

[USB Mass Storage Device] is displayed at

[Universal Serial Bus controllers].

ª If the driver has not been

recognised properly

[!] or [Unknown device] appears at [Universal

Serial Bus controllers] or [Other devices] etc.

(Where the display will appear depends on the

type of computer you are using.)

You can use the following methods to enable it to

be recognised.

Method 1: Turn off the unit and your computer

once and try verifying again.

Method 2: Remove the SD card and try verifying

again.

Method 3: Try connecting the unit to another

USB port on your computer.

To disconnect USB cable safely

Verifying the unit is correctly

recognised by the computer

VQT1D38_EG_ENG.book 99 ページ２００７年１月２７日　土曜日　午後３時１７分

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 127 128

Comments to this Manuals

No comments