Panasonic HDCSD1 Operations Instructions download pdf (Page 64)

64

VQT1D38

Recording

[ ]: Manual adjustment mode

≥Mercury-vapor lamps, sodium lamps,

some fluorescent lights

≥Lights used for wedding receptions at

hotels, stage spotlights in theatres

≥Sunrise, sunset etc.

To restore to the automatic adjustment

Set the white balance mode to [ ].

≥You can also restore the automatic adjustment

by setting the AUTO/MANUAL/FOCUS switch

to AUTO.

1 Select [ ], fill the screen with a

white subject.

2 Move the cursor button up to

select [ ].

≥When the [ ] display changes from

flashing to on, setting is complete.

≥When the [ ] display continues flashing,

the white balance cannot be set because

the place is dark etc. In this case, use the

automatic white balance.

ª About the white balance sensor

The white balance sensor A detects the type of

light source during recording.

Do not cover the white balance sensor during

recording, or it may not function properly.

ª About the black balance

adjustment

This is one of the 3CCD system functions that

automatically adjusts the black when the white

balance is set in the manual adjustment mode.

When the black balance is adjusted, the screen

will temporarily be black. (The black balance

cannot be adjusted manually.)

1 Black balance adjustment in progress.

(Flashes.)

2 White balance adjustment in progress.

(Flashes.)

3 Adjustment completed. (Lights up.)

≥When the [ ] display flashes, the manual

white balance previously adjusted is stored.

Whenever recording conditions change, re-set

the white balance for correct adjustment.

≥When setting both the white balance and the

iris/gain, set the white balance first.

To set the white balance manually

AWB

A

123

VQT1D38_EG_ENG.book 64 ページ２００７年１月２７日　土曜日　午後３時１７分

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 127 128

Comments to this Manuals

No comments