Panasonic DMRES35V User Manual download pdf (Page 25)

RQTV0136

Even when the unit is turned off, you can display the timer recording list by

pressing [PROG/CHECK].

It is also possible to edit the Timer Recording screen while timer recording

is performing. However you cannot edit the programme that is currently

being recorded.

[1] Press [PROG/CHECK].

Icon explanations (A)

¥: Currently recording

W: Programmes are overlapped. Recording of the programme with the

later start time starts when the earlier programme finishes recording.

: Timer recording standby is on. The recording will start at the set time.

n: You stopped a weekly or daily timer recording. The icon disappears

when the next timer recording starts.

F: The disc was full (not enough space).

: The TV programme may not be recorded due to copy-protect. [DVD]

X: Recording stopped. (Dirty disc or video cassette, etc.)

Check (B)

OK: Recordable

[DVD]

# (Date): The last day of daily or weekly recording. [DVD]

!: It may not be possible to record because:

≥The disc is write-protected. [DVD]

≥There is no more space left. [DVD]

≥

The number of possible titles has reached its maximum.

[DVD]

≥The new timer recording will completely or partially record

over this timer recording.

The timer recording was not performed or completed for the

following reasons:

≥

A disc or a video cassette was not inserted.

≥A disc or a video cassette without a secure accidental

erasure prevention tab was inserted.

≥The remaining recording time on the video cassette was

insufficient. [VHS]

–: All other recordable cases. [VHS]

[2] Press [3, 4] to select the programme.

≥You can also select the programme by inputting a 2-digit number

using the numbered buttons.

e.g., “5”: [0] )[5]

“15”: [1] )[5]

≥Press [2, 1] to move to the preceding or following page.

[3] Press [¢] to delete or press [ENTER] to change.

≥You cannot delete or change the programme that is currently being

recorded.

[4] If you pressed [ENTER] in step 3,

Press [3, 4, 2, 1] to change the settings and then

press [ENTER].

To continue changing the programmes repeat steps 2 to 4.

[5] Press [RETURN].

The timer recording standby mode is activated.

However, the unit will not be turned off automatically.

≥If a timer recording starts while the unit is turned on, the unit will not

automatically turn off after the timer recording is complete.

To save

power turn the unit off by pressing

[Í, DVD/VHS].

You can turn the unit off during timer recording. This will not affect

the recording.

For your reference

≥Programmes that failed to record are deleted from the timer recording list

at 4 a.m. 2 days later.

[1] Press [DRIVE SELECT] to select the drive currently

recording and then press [∫, STOP].

≥A confirmation screen appears.

[2] Press [2] to select “Stop Recording” and then

press [ENTER].

≥The recording stops and the timer recording programme is deleted

from the Timer Recording screen. (Daily and weekly timer recordings

are not deleted and timer recording will start as set.)

Each programme in the Timer Recording screen can be released from

recording standby.

[1] Press [PROG/CHECK].

[2] Press [3, 4] to select the programme.

[3] Press [SUB MENU], press [3, 4] to select “Timer

Off” and then press [ENTER].

≥It is also possible to press [A] to release recording standby.

The Timer Recording icon disappears.

≥Be sure to repeat these steps and select “Timer On” in step 3 or

press [A] in step 3 before the set recording time to put the

programme on recording standby. The timer recording will only work

if the programme is in recording standby and the timer icon is

displayed.

[VHS]

If, at the beginning of a timer recording, there is not enough tape remaining

to complete the recording, the Auto SP/LP function will automatically run

the tape at LP speed for recording. This ensures that the entire

programme will be recorded. If LP mode is not enough to stretch the

remaining tape to fit the whole programme you will not be able to record

the whole TV programme.

≥It is not possible to automatically activate EP mode.

≥The tape length must be set correctly. (l 59)

≥This may not work correctly with some video cassettes.

≥It may not work correctly when NTSC is set as the “TV System”. (l 59)

≥If the recording mode changes from SP to LP during a timer recording,

some picture distortion occurs at that point.

∫ Check, change or delete programmes

Timer

Recording

DVD

VHS 17:50:32 5. 4. Wed

Remain 1:00 XP

New Timer Programme

Name

No. Date

Start

Drive

space

Stop Drive

Mode

∫ Cancel a timer recording that has already

begun

∫ Release programme from standby

∫ Auto SP/LP mode

Name

No. Date

Sta

Timer

Recording

DVD

VHS

Remain

New Time

01 8. 4. Sat 18:1

¢¢¢04

2nd programme

(45 min.)

1st programme

(30 min.)

30 min. in SP

15 min.

in SP

30 min.

in LP

Timer recording

Video cassette (e.g., 60-minute cassette)

Timer Recording

RQTV0136.book 25 ページ２００６年４月１９日　水曜日　午後１時２８分

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comments to this Manuals

No comments

Panasonic DMRES35V User Manual Page 25

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRES35V