Panasonic DMRES35V User Manual download pdf (Page 66)

RQTV0136

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not

solve the problem, consult your dealer.

Power Page

Displays Page

The following do not indicate a problem with the unit:

≥Regular disc/video cassette rotating sound. The sound of the disc rotating may become louder especially when finalizing a DVD-R, DVD-R DL,

DVD-RW (DVD-Video format), +R or +R DL.

≥Poor reception due to atmospheric condition.

≥Image disturbance during search.

≥Operations do not work due to a poor-quality disc. (Try again using a Panasonic disc.)

≥The unit freezes due to the activation of one of its safety devices. (Press and hold [Í/I] on the main unit for 10 seconds.)

No power ≥Insert the AC mains lead securely into a known active household mains socket. 12

The unit switches to the standby

mode.

≥One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on. –

The display is dim. ≥Change “FL Display” in the “Setup” menu. 58

“0:00” is flashing on the unit’s

display.

≥Set the clock. 61

The recording time display, the

transfer (copying) process display

and the displayed recording time

of MP3 are different from the actual

time.

≥The time on the unit’s display and the remaining recording time on the screen may be indicated

less or more than the actual value.

≥The available recording space on DVD-R, DVD-R DL, +R or +R DL does not increase when you

delete titles.

≥Available recording space on a DVD-RW (DVD-Video format) or +RW increases only when the

title recorded last is deleted. It does not increase if other titles are deleted.

≥If you repeat recording or editing about 200 times or more, the remaining capacity of the DVD-R,

DVD-R DL, +R or +R DL is reduced and then recording or editing may be disabled.

(For the second layer on DVD-R DL and +R DL, this happens after about 60 times.)

≥The time during fast forward and rewind, or the process during transfer (copy) may not be

displayed accurately.

–

Compared to the actual recorded

time, the elapsed time displayed is

less (only when recording in

NTSC).

≥The displayed recording/play time is converted from the number of frames at 29.97 frames (equal

to 0.999 seconds) to one second. There will be a slight difference between the time displayed and

the actual elapsed time (e.g.,actual one-hour elapsed time may display as approximately 59

minutes 56 seconds). This does not affect the recording.

–

The tape counter is not changing. ≥The tape counter does not change while playing unrecorded parts. The “second” display changes

as follows:

(e.g., Blank after 1 h 36 min)

≥The unit’s display also appears like this if the tape is dirty or damaged. Consult your dealer if this is

the case.

–

“U88” is displayed and the disc

cannot be ejected.

≥The unit is carrying out the recovery process. Do the following to eject the disc.

(1) Press [Í/I] on the main unit to switch the unit to standby. If the unit does not switch to standby,

press and hold [Í/I] on the main unit for about 10 seconds. The unit is forcibly switched to

standby.

(2) While the unit is off, press and hold [∫] and [CH, W] on the main unit at the same time for

about 5 seconds. Remove the disc.

–

RQTV0136.book 66 ページ２００６年４月１９日　水曜日　午後１時２８分

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 75 76

Comments to this Manuals

No comments

Panasonic DMRES35V User Manual Page 66

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRES35V