
Basic Settings
storing phone numbers for speed dialing
Each dialing station can store a phone number up to 30 digits in length and the associated station name up
to 10 alpha-numeric characters.
0
ocpcj)
CpCpCp
cS)®®
CD©®
CpCpCp
CpCp®
®CD®
®®®
Press MENU repeatedly
until the following is
displayed.
2.STORE TEL NO.
Press #, then press a
2-digit number (00-21).
Example: Station #00
<A00>=
Enter a phone number.
Press START/SET to
store the number.
NAME=
®Cp®
CpCp®
©CD®
® ® ®
Enter the station name
by following the
instructions on page 34.
Press START/SET to
store the station name.
—To program other
stations, repeat from
step 2.
Press STOP to end the
program.
Notes:
•
To enter a hyphen in a phone number, press the LOWER key. A hyphen is counted as 2 digits.
• If you make a mistake while programming, press the STOP button, then make the correction.
• To erase a programmed phone number in step 3, press the STOP button when the cursor is positioned on
the beginning of the number.
• Confirm that phone numbers and their station names have been correctly stored by printing the telephone
number list (see page 64).
To keep a phone number secret
Use this feature to keep a whole phone number or a portion of a phone number secret. When the telephone
number list is printed out (see pages 64 and 65), secret numbers will not be printed.
o
3
SECRET 8
CpCpCp
■ ♦
o SECRET 8
Using the SECRET (direct cali station 3) button:
Press SECRET before and behind the phone number you wish to keep
secret.
Example:
The phone number you wish to keep secret is 12345.
Press SECRET, 1 2 3 4 5 and SECRET again.
<A01>=[12345]
Note:
• Pressing the SECRET button once counts as two digits.
39
Comments to this Manuals