Panasonic DPC262 Operations Instructions download pdf (Page 6)

Product Overview

Stop operation immediately if your machine

emits smoke, excessive heat, unusual noise,

or abnormal smell, or if water is spilt onto the

machine. These conditions can cause fire.

Immediately switch Off and unplug the machine,

and contact the authorized Panasonic dealer.

Do not disconnect or reconnect the machine

while the power switch is in the On position.

Disconnecting a live connector can cause

arcing, consequently deforming the plug and

cause fire.

When the machine is not used over an extended

period of time, switch it Off and unplug it. If an

unused machine is left connected to a power

source for a long period, degraded insulation

can cause electric shocks, current leakage or

fire.

Be sure to switch Off and unplug the machine

before accessing the interior of the machine for

cleaning, maintenance or fault clearance.

Access to a live machine’s interior can cause

electric shock.

Once a month, unplug the machine and check

the power cord for the following. If you notice

any unusual condition, contact the authorized

Panasonic dealer.

● The power cord is plugged firmly into the

receptacle.

● The plug is not excessively heated, rusted,

or bent.

● The plug and receptacle are free of dust.

● The cord is not cracked or frayed.

Power and Ground Connection

Cautions

Ensure that the plug connection is free of dust.

In a damp environment, a contaminated

connector can draw a significant amount of

current that can generate heat and eventually

cause fire if left unattended over an extended

period of time.

Always use the power cord provided with your

machine. When an extension power cord is

required, always use a properly rated cord.

● 220 - 240 V / 6.5 A

If you use a cord with an unspecified current

rating, the machine or plug may emit smoke or

become hot to the touch.

Do not attempt to repair, pull, bend, chafe or

otherwise damage the power cord. Do not place

a heavy object on the cord. A damaged cord

can cause fire or electric shocks.

Never touch a power cord with wet hands.

Danger of electric shock exists.

If the power cord is damaged or insulated wires

are exposed, contact the authorized Panasonic

dealer for a replacement. Using a damaged cord

can cause fire or electric shocks.

When disconnecting the machine, grasp the

plug instead of the cord. Pulling on a cord

forcibly can damage it and cause fire or electric

shock.

For Your Safety

To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-C262/C322 to

ensure proper and safe operation of your machine.

■ This section explains the Warnings and Cautions used in this Operating Instructions manual.

WARNING Denotes a potential hazard that could result in serious injury or death.

CAUTION

Denotes hazards that could result in minor injury or damage to the machine.

■ This section also explains the graphic symbols used in this Operating Instructions manual.

These symbols are used to alert operators to a specific operating procedure that must not be

performed.

These symbols are used to alert operators to a specific operating procedure that must be

emphasized in order to operate the machine safely.

This symbol is used to alert operators to a heated surface that may cause burns and requires

close attention.

WARNING

Safety Information

1 2 3 4 5 6 7 8 9 10 11 ... 109 110

Comments to this Manuals

No comments

Panasonic DPC262 Operations Instructions Page 6

Comments to this Manuals

Related products and manuals for Print & Scan Panasonic DPC262