Appendix
98
Specifications
Paper Type
● Commercial papers described below are acceptable, however, the standard paper (Hammermill
Laser Print) is recommended for optimum copy quality and performance of the machine.
Paper Type Paper Weight Tray 1 - 4 Sheet Bypass 2-Sided Copy/Print
Thin 55-63 g/m
2
Not Compatible Compatible Not Compatible
Plain 64-105 g/m
2
Compatible Compatible Compatible
Glossy 64-105 g/m
2
Compatible Compatible Compatible
Recycled 64-105 g/m
2
Compatible Compatible Compatible
Thick 106-169 g/m
2
Not Compatible Compatible Not Compatible
Coated 106-169 g/m
2
Not Compatible Compatible Not Compatible
Index / Cover 170-220 g/m
2
Not Compatible Compatible Not Compatible
Coated/Cover 170-220 g/m
2
Not Compatible Compatible Not Compatible
Special
∗
Not Compatible Compatible Not Compatible
∗
Special Purpose Paper
Labels : FP-111L
Envelopes : Commercial #10 (241.3 mm x 104.8 mm), Monarch 7 3/4 (190.5 mm x 98.4 mm),
DL (220 mm x 110 mm), C5 (229 mm x 162 mm)
Transparency : CG3700 3M
● The following paper type limitations correspond to the tray used.
Paper Type Inner Tray Outer Tray DA-FS320 DA-FS325
Index / Cover Compatible Compatible Not Compatible Non-Sort only
Coated Compatible Compatible Not Compatible Non-Sort only
Labels Compatible Compatible Not Compatible Non-Sort only
Envelopes Compatible Compatible Not Compatible Not Compatible
Transparency Compatible Compatible Non-Sort only Non-Sort only
● Do not use the following type/flawed paper to avoid image quality related problems, mechanical
failures or misfeeding problems.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
Tracing paper, Pressure-sensitive paper, Transparency with white border,
Special paper for ink-jet printer, Thermal recording paper, Thermal transfer paper, Photo paper,
Light paper (up to 55 g/m
2
), Curled paper, Adhesive paper/envelope, Wet paper/envelope,
Textured paper, Stapled paper, Copied/Printed paper produced by other machine.
● Load the paper with the printing side Face Down in a Portrait Orientation.
Envelope
(Only for printing)
Face Down.
Flap to the right.
OHP film / Labels
Face Down
or
Sheet Bypass Sheet Bypass
• Certain types of envelopes may get wrinkled.
● Ensure to change the media type selection in the control panel when changing the media loaded
on the trays. (Ex: Select "Transparency" when Transparencies are loaded in the Sheet Bypass)
Comments to this Manuals