Panasonic WJ-GXD400 Instruction Manual

Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.The model number is

Setup itemsEnter the host name to be used.Enter the user name to log into the DDNS server.HostUser namePassword Enter the password to log into the DDN

Reset to the default (Except thenetwork settings)RebootSetup items11Initialize the setting data. Restart this unit.Default resetMaintenanceProduct inf

12Network SetupNetwork Settings of the PCThe TCP/IP setting of the PC shall be changed to conform to the settings of this unit. The IP address of the

136 Select "Internet Protocol Version 4 (TCP/IPv4)",and then click "Properties". The "Internet Protocol Version 4 (TCP/IPv4)&

14Setup WindowSetup Window Call-up/TerminationThis unit can be operated using a web browser installed on the PC. 1 Boot the PC. 2 Start the web browse

15Major Operating Controls and Their FunctionsTop Pageq [Basic] buttonPerforms the image and audio settings at time dis-play or startup. w [Display] b

16BasicPerform the settings for the basic operations of this unit. Time & dateThe settings of date and time are performed. 1 Click the [Basic] but

17 Summer time (daylight saving) tableSet the start (On)/end (Off) date and time for summertime. When the [Setup >>] button is clicked the foll

18Default screenThe video and audio outputs can be automatically obtained at starting this unit. 1 Click the [Basic] button on the setup menu. 2 Click

19LanguageSelect the display language for the web browser fromthe following. 1 Click the [Basic] button on the setup menu. 2 Click the [Language] tab.

2CONTENTSPreface ... 3About t

20DisplayOSDThe settings of information displayed on the screen are performed in this section. 1 Click the [Display] button on the setup menu. 2 Click

21 Display modeSelect either the "Full screen" or "Trimmed screen". When the display mode is toggled, restart this unit. If edges

22EventWhen an event signal (alarm notification) is received from another network device, an alarm action starts in accor-dance with the setting.Site

23Error notificationWhen an error occurs, the setting to send the message to the previously registered addresses is performed. Up to 3 destinations of

24ScheduleThe schedule setting is performed in accordance with the specified day of the week and time of the day. It is possible to switch camera chan

25Display pattern registration1 Click the [Schedule] button on the setup menu. 2 Click the [Display pattern registration] tab. The "Display patte

26CameraThe network settings (such as address and port number) of cameras, group settings, and the settings of sequentialdisplay are performed in this

27Setup items Registered camera list[Camera no.]Displays the camera number. Up to 256 cameras canbe registered.[Camera title]Displays the registered

28[Image capture size*]Select an image capture size. Image capture size canbe selected only when "JPEG" is selected for"Compression&quo

29Tour sequenceCamera images are automatically switched and displayed in a specified order. The tour sequence function works with the preset positions

3PrefaceThis unit (WJ-GXD400, WJ-GXD400/G) is an IP-network-ready decoder. This unit receives video and audio data through the IP network and provides

30Group sequenceLive images from the camera/encoder/recorder on all the screens are simultaneously switched and displayed in the3-screen/6-screen mode

1 Click the [Camera] button on the setup menu. 2 Click the [Group] tab. The "Group setup" window will be displayed. 3 Click the [Registered

32ServerProxyThe proxy server settings can be performed with this menu.1 Click the [Server] button on the setup menu. 2 Click the [Proxy] tab. The &q

33NTP ServerWhen time is adjusted with reference to the NTP (Network Time Protocol) server, the settings in this section are per-formed. 1 Click the [

34NetworkBasic SettingsThe network configuration for this unit is performed. 1 Click the [Network] button on the setup menu. 2 Click the [Basic] tab.

35[HTTP port]A number from 1 - 65535 is available. Under normalconditions, assign 80 to the number. Default: 80Notes:• Depending on the network setti

36DDNS SetupThe settings are performed to use the DDNS (Dynamic Domain Name System). Use of the DDNS function provides access with "The host name

37User Management [User mng.]The settings for the user authentication/host authentication are performed to restrict access this unit from PCs. It is p

38 User checkIt is possible to check the user names registered for theuser authentication. To delete the displayed user, click the [Delete] button. I

39Host authenticationThe information of a PC (host) is registered, which accesses this unit via a network such as a LAN. Up to 32 hosts can be registe

4Note:• When using a PC that does not meet the above requirements, displaying of images may become slow or the webbrowser may become inoperable. Trade

40Deletion of host information1Click the [User mng.] button on the setup menu. 2Click the [Host authentication] tab. The "Host authentication&quo

41MaintenanceThe conditions of this unit and the network can be checked. The software and hardware versions, MAC address, serial number, and temperatu

42Error LogThe error logs (occurrence date and error details) will be displayed in list form.1 Click the [Maintenance] button on the setupmenu. 2 Clic

43Error log listThe following are the descriptions about the contents of the error log and the network log. Error Error log Network logRestart PWR ON

44Reset to the DefaultRestart this Unit1 Click the [Maintenance] button on the setupmenu. 2 Click the [Default reset] tab. The "Default reset&quo

45ViewingLive Image ReceptionLive images are received from the camera or encoder. If a camera manufactured by other than Panasonic is used, live imag

46 1-screen 3-screen (primary screen on the left) 3-screen (primary screen on the right) 6-screen BorderThe split border can be colored. The bord

47ItemDisplay ModeThere are 2 display modes, "Full screen" mode (full-resolution display) and the "Trimmed screen" mode (trimmingm

48ItemItemGroup sequenceLive images on all the split screens can be automatically switched and displayed in a specified order during display-ing on a

49Site alarmWhen this unit receives an alarm notification fromanother network device, the following are provided. (1) Alarm message displayThe message

5Network SecurityAs you will use this product connected to a network, your attention is called to the following security risks.• Leakage or theft of i

50• Is the power of this unit turned on? Check whether the power of this unit is turned on.Confirm that the OPERATE indicator is lit. –Troubleshooting

• Check the settings of [Basic] on the setup menu.16• If "On" is selected for "Proxy", MPEG-4/H.264 imagescannot be received or di

• When other devices obtain images from the camerasand recorders, this product may fail to obtain and dis-play images due to restrictions of the camer

––• The audio output is not provided during the sequencedisplay (tour sequence/group sequence). The audio output is not provided when the compres-sion

For U.S. and Canadian fields:Panasonic System Networks Company of America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/For

6Operation FlowThe operation flow of this unit is as follows. Rack MountingInstall the unit in the rack. Refer to the Installation Guide for further i

Setup items7Setup Menu ChartPerforming each setting on the setup menu should be completed in advance to operate this unit.Refer to "Setup Window

Setup items8EventSite alarmSite alarmOriginating port numberAlarm message displayOutput terminalAlarm reset timerError notificationChoose whether or n

9Setup itemsCameraNW camera setupCameraLive image sourceAddressHTTP portUser namePasswordSelect a number assigned to the camera whose informationwill