Panasonic WV-SP302 Installation Guide

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number is

10Network securityAs you will use this unit connected to a network, your attention is called to the following security risks. q Leakage or theft o

11PrecautionsRefer installation work to the dealer.Installation work requires technique and experi-ences. Failure to observe this may cause fir

12Turn the power off when do wiring of this product.Failure to observe this may cause electric shock.In addition, short circuit or wrong w

13 • When some SDHC/SD memory cardsareused with this product, the product may not work properly or performance deterio-ration may be

14Precautions for InstallationThis camera is designed to be used indoors.This camera is not operable outdoors.Do not expose this camera to direct sunl

15Angle adjustmentBe sure to loosen the screw of this product mount bracket when the camera angle is adjusted. If the camera angle is ch

16Major operating controls<Side view><Rear view>About the [INITIAL SET] buttonAfter turning off the power of the camera, turn on the power

17Lens mountingSlowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens con-nector of the camera. Important: SP30

18Note: • Themostcommonuseofavarifocallensandazoomlens Note that the adjustment method is different depending on the type. For

19 x Fasten the zoom lock knob. c Press the focus assist button. → "FOCUS ADJUSTMENT" menu will be displayed. The focus assist functi

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PER

20Insert/remove an SDHC/SD memory cardImportant: • BeforeinsertinganSDHC/SDmemorycard,turnoffthepowerofthecamerafirst. • Wheninserti

21InstallationConnect the safety wireThe following is an example of safety wire connection.Important: • Besuretoinstallthesafetywire.Askyour

22Wire engaging holeSafety wireFor mounting on wallz Put the tripod mount base on the bottom of the camera. Secure the safety wire lug for wall

23Camera mountingThe camera is mounted on the camera mount bracket and the safety wire is secured. Important: • Theinstallationareashallbestron

24x Put the connection hook of the safety wire on the safety wire plate or the safety wire lug secured on the foundation part of the

25ConnectionCaution: • FORULLISTEDMODEL(S),ONLYCONNECT12VDCCLASS2POWERSUPPLY.Before starting the connection, turn off the power of this

26v Connect external devices to the EXT I/O terminal. When connecting an external device, remove 9 mm - 10 mm {11/32 inches - 13/32

27When using 12 V DC power supply* q Loosen the screw of the power cord plug (accessory). w Connect the cable of the 12 V DC power supply* to the po

28Connection example when connecting to a network using a PoE hub<Required cable>LAN cable (category 5 or better, straight, STP*)* PAL models on

29Configure the network settingsInstall the softwareBefore installing the software, read the readme file on the provided CD-ROM first.Software include

3We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative

30z Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the provided CD-ROM.x Click the [IP set

31TroubleshootingBefore asking for repairs, check the symptoms with the following table.Contact your dealer if a problem cannot be solved even after c

32Specifications● BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: WV-SP306 12 V DC*: 350 mA, PoE: 4.4 W (Class 2 devi

33 0.019 lx {0.0019 footcandle} (F1.4, Auto slow shutter: max. 16/30 s, AGC: High)* BW: 0.2 lx {0.02 footcandle} (F1.4,

34Resolution: Aspect ratio: 4:3(WV-SP302) H.264 800 × 600/ VGA (640 × 480)/ QVGA (320 × 240), max. 30 fps MPEG-4 VGA (640 × 480)/ QVG

35 SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) *1 Either H.264 or MPEG-4 is selectable. *2 Transmissi

Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols on the products, packaging, and/or accompanying docu

4ContentsImportant safety instructions ... 5Limi

5Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5)

6Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDIN

7Main functionsH.264/MPEG-4 and JPEG triple encodingH.264/MPEG-4 dual stream output and JPEG output can be simultaneously provided. * Either H.264 or

8Auto back focus (ABF) function SP306AutoBackFocus(ABF)ensureseasyinstallationandstablefocusinbothcolorandblack&whitemodes.Focus

9System requirements for a PCCPU: Intel® CoreTM 2 Duo 2.4 GHz or faster recommendedMemory: 512 MB or more (A minimum of 1 GB memory is required when