Panasonic AK-MSU930P User Manual download pdf (Page 5)

Parts and their functions

3 Camera selector switches [CAMERA]

These are used to select one camera and one CCU as

the pair which is to be controlled by the MSU.

A camera is selected by pressing the camera selector

switch with the same number as the camera to be

selected (its lamp will light). The selection is released by

pressing the camera selector switch of the selected

camera (its lamp will turn off).

When a camera selector switch is pressed, the MSU

settings (such as the switch lamp lighting and selection)

are performed using the information on the settings for

the camera concerned.

The details of the functions given below apply when one

or more camera selector switches have been selected.

4 MODE ON/OFF switches

These switches are for setting the camera operation

modes. The modes corresponding to the switches with

the lighted lamps are selected.

5600K switch [5600K MODE]

This is used to change the amplification rate of the GBR

signals by an electrical circuit to achieve the white

balance that corresponds to the color temperature of

5600K. When it is pressed, the B video signal is

attenuated by approximately -6 dB, the R video signal is

boosted by approximately 3 dB, and the G video signal is

not attenuated. Select this switch when shooting under a

5600K light source or shooting outdoors.

Lighted: 5600K

Off: 3200K

Flare switch [FLARE OFF MODE]

This is used to cancel the flare correction function (which

suppresses the rise of the pedestal in proportion to the

light quantity).

Lighted: Flare correction OFF (flare correction function

is canceled)

Off: Flare correction function is valid.

Black gamma ON switch [BLACK GAMMA ON MODE]

This is used to enable the black gamma function (which

changes the video signal amplification rate in parts where

the light quantity is low).

Lighted: Black gamma ON (black gamma function is

valid)

Off: Black gamma function is canceled.

Gamma OFF switch [GAMMA OFF MODE]

This is used to cancel the gamma correction function

(which provides the signal level of the video signals with

the reverse characteristics matching the TV video signal

input and light-emitting level characteristics).

Lighted: Gamma correction OFF (gamma correction

function is canceled)

Off: Gamma correction function is valid.

Knee OFF switch [KNEE OFF MODE]

This is used to cancel the knee function that attenuates

those parts of the video signals where a particular level

(knee point) has been exceeded so that they will not

become saturated as easily.

Lighted: Knee OFF (knee function is canceled)

Off: Knee function is valid.

White clip OFF switch [WHITE CLIP OFF MODE]

This is used to cancel the white clip function by which the

video signal output is clipped (saturated).

Lighted: White clip OFF (white clip OFF function is valid)

Off: White clip ON

Matrix ON switch [MATRIX ON MODE]

This is used to enable the matrix function by which the

chroma saturation is compensated for the G (green), B

(blue), R (red), Ye (yellow), Cy (cyan) and Mg (magenta)

signals and by which the chroma saturation and hue are

compensated for the I (skin tone) signals.

Lighted: Matrix ON (color correction function is valid)

Off: Matrix OFF

PM character display switch [CHARACTER]

This is used to set the characters to be displayed on the

PM to ON or OFF.

HDTV detail OFF switch [HD.DTL OFF MODE]

This is used to cancel the detail enhancer function that

enhances (adjusts the relative hardness/softness of) the

picture quality in the detailed parts of the HDTV video

output.

Lighted: Detail enhancer OFF (function for enhancing

picture quality in detailed parts canceled)

Off: Detail enhancer ON

SDTV detail OFF switch [SD.DTL OFF MODE]

This is used to cancel the detail enhancer function that

enhances (adjusts the relative hardness/softness of) the

picture quality in the detailed parts of the SDTV video

output.

Lighted: Detail enhancer OFF (function for enhancing

picture quality in detailed parts canceled)

Off: Detail enhancer ON

HDTV skin tone detail ON switch [HD SKIN ON MODE]

This is used to suppress the detail in the skin color parts

of the HDTV video output.

SDTV skin tone detail ON switch [SD SKIN ON MODE]

This is used to suppress the detail in the skin color parts

of the SDTV video output.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Panasonic AK-MSU930P User Manual Page 5

Comments to this Manuals

Related products and manuals for Tools Panasonic AK-MSU930P