
Machine Vision B/W CCD CameraGP-MF130OperatinginstructionsPanasonic.Of tfM product pl#et* nSlTi>CbC>^9 COnpIMMy
PREPARATIONS1. Power Supply for CameraPrepare a regulated DC power supply which can supply DC 12 V ±10 % DC 170 mA or more current and
SYSTEM CONNECTIONSCaution: Keep the power switches of all units to OFF before connections.1. Connect the optional camera cable GP-CA34 between the co
EXTERNAL SYNCHRONIZATION2 ; 1 InterlaceThe GP-MF130 works in 2 : 1 interlace mode when external 2 : 1 interlaced HDA/D signal is supplied to pin-fi an
SPECIFICATIONSPick-up Device Image Size :SynchronizationHorizontal Resolution Minimum IlluminationSignal to Noise Ratio:Gamma :Gain Selection : Electr
Vibration Resistance : Shock Resistance ; Power Source : Ambient Temperature : Dimensions :Weight :10 G (10 Hz -150 Hz) (2 hours each for three axes)8
PanasonicMedical & Industrial Video CompanyA Division of Panasonic Broadcast & Teievision Systems Company A Unit of Matsushita Eiectric Corpor
ACAUTIONRISK OF ELECTRIC SHOCK □ ONOT OPENCAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
CONTENTSPREFACE ... 2FEATURES ... 2PRECAUTIONS
PREFACE FEATURESThe Panasonic GP-MF130 Machine Vision B/W CCD Camera has a 1/3" Interline Transfer CCD image sensor which features
PRECAUTIONSDo not attempt to dissemble the camera.To prevent electric shock, do not remove screws or covers.There are no serviceable parts insid
7. Do not drop anything inside the camera.Dropping metal for example inside the camera could permanently damage the unit. If anything is drop
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSJj(D6P-if1S0QM52iSL1. 1/3” Manual Iris Lens (Sold Separately)2. Camera Connector (12-pin)This is connect
CAUTION: CONNECT THIS TO ADC 12V CU^SS 2 POWER SUPPLY ONLY.Pin No.Description1 Ground2+ 12V IN3Ground for Video Out4 Video Out5 Ground for HD6HD IN7VD
The shutter speed can be set as below:Switch 1Shutter SpeedNo. 2 No, 3 No. 4 No. 5OFF OFF OFFOFFNormalONOFF OFF OFF 1/100OFF ONOFF OFF 1/500ON ON OFF
Comments to this Manuals