Panasonic WV-BP310 User Manual download pdf (Page 19)

(3) Set the Lens Selection Switch (9) to the proper

position as follows.

DC: The mounted lens is one of the lenses listed

on pages 10, 11, 12 and 13 or one that

requires the DC control signal for auto iris

control.

VIDEO: The mounted lens requires video signal

for auto iris control.

NOTE:

Refer to item-9 on page 6 for the tens selection

switch.

FOCUS OR FLANGE-BACK

ADJUSTMENT

The following adjustment should be made by qualified

service personnel or system installers.

1. Loosen screws on the flange-back adjusting ring.

Focus adjust for

C-mount iens

2. Turn the flange-back adjusting ring to the desired

position.

Caution:

Do not turn this ring too much to counterclockwise

as this could damage the inner glass and CCD

image sensor.

3. Tighten the screws on the flange-back adjusting

ring.

-17-

1 ... 18 19 20 21 22 23 24

No comments

Panasonic WV-BP310 User Manual Page 19