Panasonic SL1200GAEEG Operations Instructions download pdf (Page 13)

Getting started

English

(13)

Fitting the turntable

1

Insert the centre spindle in the

centre hole of the turntable.

Attention

z

Be careful when handling the turntable, as

it is heavy.

z

Wipe off fingerprints or dirt with a soft cloth.

2

Slowly lower the turntable while

aligning the rotor shaft fix holes

(three locations) with the rotor

shafts.

z

Turn the turntable in both directions to

align the holes with the rotor shafts.

Attention

z

If the rotor shafts are misaligned, a gap

remains between the turntable and main

unit and you cannot mount the turntable

correctly. Do not force the turntable

downward.

3

Attach the washers, belleville

springs, and screws for turntable to

the rotor shaft fix holes, and tighten

the mounting screws securely.



To remove the turntable



Loosen the mounting screws for turntable

and remove them.

- Keep the screws, belleville springs, and

washers carefully.

k

Hold the turntable with both hands and

slowly pull it straight up.

Fitting the turntable mat

4

Lay the turntable mat on the

turntable.

Attention

z

When tightening screws,

do not allow screw heads

to protrude from the top

surface of the turntable.

z

Tighten the three screws

evenly.

13

Attaching the head shell

5

Fit the head shell with the

cartridge into the tone arm.

Keep the head shell horizontal

and tighten the locking nut.

z

Be careful not to touch the stylus tip.

Locking nut

Head shell

0

Attaching the balance weight

6

Attach the balance weight to the

rear of the tone arm.

0

Balance weight

0

Auxiliary weight

z

The inside of the balance weight is greased.

Note

z

Attach the included auxiliary weight to the

rear of the tone arm according to the weight

of your cartridge.

For adjustable cartridge weight ranges, see

"Applicable cartridge weight range". (



25)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comments to this Manuals

No comments