Panasonic SL1200GAEEG Operations Instructions download pdf (Page 19)

Getting started

English

(19)

Armlift height

Make an adjustment according to your

cartridge if necessary.

Preparation

z

Put a record on the turntable.

z

Remove the stylus cover, taking care not

to damage the stylus, then release the arm

clamp.

z

Lift the cue lever and move the tone arm over

the record.

You can choose manual mode or auto mode.

(Factory setting: Auto mode)



Auto mode

We recommend auto mode that can maximize

performance of the product. It adjusts the

"startup speed" (described below) automatically.

(The set torque control is not reflected.)



Move the mode switch to [A] using a tool

such as a thin screwdriver.



Manual mode

Allows you to adjust the "startup speed" manually.



Move the mode switch to [M] using a tool

such as a thin screwdriver.

Startup speed

You can adjust the startup speed (the time for

the turntable to reach the constant speed) from

pressing [START-STOP] and the torque gain at

the constant speed.



Adjust the torque knob using a flat

screwdriver.

z

H direction: Fast startup

z

L direction: Slow startup

Brake speed

You can adjust the brake speed from pressing

[START-STOP] until the turntable stops.

(Adjustment is possible in both auto and

manual mode.)



Adjust the brake speed control knob using a

flat screwdriver.

z

S direction: Slow stop

z

F direction: Fast stop

S

BRAKE

TORQUE

F

H

L

M

A

Brake speed

control knob

Torque knob

Mode switch

Adjusting the turntable startup/

brake speed

Note

1

Check the armlift height (distance

between the stylus tip and record

surface).

If adjustment is needed, go to

step

2

.

z

The armlift height is factory-adjusted to

8 to 13 mm.

2

Return the tone arm to the arm

rest and fix it with the arm clamp.

Turn the adjustment screw.

z

Turning the screw clockwise lowers the

armlift.

z

Turning the screw anti-clockwise raises

the armlift.

4

1

2

Armlift

screw

Armlift

z

Use a commercially available mini flat

screwdriver (2.4 mm) to adjust the torque/

brake speed control knob.

z

Do not turn the knob too far using an

excessive force.

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments