Panasonic PT-AE8000U Operations Instructions download pdf (Page 31)

Projecting an image

ENGLISH

- 31

Basic Operation

Projecting an image

Check the connections of the external devices

(



page 26) and the connection of the power cord

(



page 28), and switch on the power (



page 29), to

start projecting. Select the video for projection, and

adjust appearance of the projected image.

Selecting the input signal

1) Switch on the external devices.

Press the play button on an external device, such

as a Blu-ray player. When [AUTO SEARCH] in the

[OPTION] menu is [ON], the projector automatically

searches for an input signal and starts projection.

(



page 78)

2) Switch the video input.

The video selected with the <INPUT SELECT>

button is projected. (



page 34)

Attention

The video may not be displayed properly depending on

the external device, or the blu-ray disc or DVD disc, to

be played back. In such cases, set [TV-SYSTEM], [RGB/

] or [RGB/YP

] of the [ADVANCED MENU].

(



page 57, 58)

Check the projection screen and video aspect ratio, and

select the most appropriate aspect ratio with [ASPECT]

in the [POSITION] menu. (



page 61)

Adjusting the image

1) Adjust the angle of the projector.

Place the projector parallel to the screen, and

then install it on a at surface so that the screen

becomes rectangle.

If the screen is tilted lower than the screen, extend

the adjustable feet to make a rectangle screen.

For details, see “Front adjustable feet and throwing

angle”. (



page 23)

2) Remove the lens shift cover.

For details, see “Opening the lens shift cover”.

(



page 19)

3) Rotate the lens shift lever in a

counterclockwise direction to disengage

the shift lever lock.

4) Adjust the lens shift.

Adjust the projection position with the shift lever.

See “Lens shift and positioning”. (



page 24)

5) Rotate the shift lever clockwise to x.

6) Attach the lens shift cover.

7) Managing the lens control settings

Press +/− of the <FOCUS> and <ZOOM> buttons

on the device controls to adjust.

Press the <FOCUS> buttons (+/-) to change the

projection size, and press the <ZOOM> buttons

(+/-) again to ne tune the projection size.

<FOCUS> button

<ZOOM> button

Note

It is recommended that you display the [ZOOM/FOCUS]

test pattern from the [LENS CONTROL] menu to

accurately adjust the focus (



page 73).This can also be

performed with the remote control. (



page 32)

Panasonic recommends that focus adjustment be made

after 30 minutes or more have elapsed since picture

display.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

Comments to this Manuals

No comments

Panasonic PT-AE8000U Operations Instructions Page 31

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-AE8000U