Panasonic DMRES35V User Manual download pdf (Page 33)

RQTV0136

The unit usually makes tracking adjustments automatically, but you may

need to adjust it manually if noise appears on a video cassette recorded

on other equipment.

During play

Press and hold [TRACKING/V-LOCK, r] or

[TRACKING/V-LOCK, s] until the noise bars disappear.

≥If the noise bars appear during still playback, start slow-motion play and

then adjust the tracking.

If the still picture shakes, perform the following operation.

While paused

Press and hold [TRACKING/V-LOCK, r] or

[TRACKING/V-LOCK, s] until the picture stops

shaking.

∫To return to auto tracking

Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]

simultaneously.

∫To remove the noise from a paused picture

Start Slow-motion play, then adjust the tracking.

Notes

≥This function may not work with some TVs and video cassettes.

≥You can also adjust the tracking and vertical synchronization with

[CH, X] and [CH, W] on the main unit

The unit automatically records special index signals onto the tape every

time a recording is started. The index search function makes use of these

index signals to let you find the beginning of a desired programme quickly

and easily.

While stopped or during normal play

Press [:, INDEX] or [9, INDEX].

≥The unit automatically starts playback after the index

signal is found.

≥Each press increases the number of skips.

∫To cancel the index search

Press [∫, STOP].

Notes

≥Up to 20 index signals can be searched for in both directions.

≥When you press either of the buttons too much, you can correct the

number of skips by pressing the opposite button.

≥The figure on the display decreases by 1 each time an index signal is

located.

≥This feature may not work correctly if the index signals are too close

together. Make recordings of at least 5 minutes.

Press [AUDIO] to select the audio type.

The audio changes as follows:

L R (Stereo)

No display (Normal audio track)

^---------------------------------------------------------------}

When playing back VHS, the on-screen displays that are illustrated below

can be displayed.

To see these displays, set the “On-Screen Messages” item in the Display

menu in Setup to “Automatic” (l 58).

Press [STATUS].

The following displays appear.

Note

≥The on-screen display may be distorted depending on the video cassette

being played back or the input signal.

Adjusting the playback picture

∫ Manual tracking

∫ Vertical locking adjustment

VHS Index Search System (VISS)

∫Index signals are recorded in the following cases.

≥When a recording is started by pressing [¥, REC].

≥When timer recording is started.

Changing audio during play

Various indications in on-screen display

1 Currently selected drive

Audio indicators

The Left (L) and Right (R) indicators show which sound mode is

selected as follows:

L R (Stereo): Both the L and R indicators appear.

L: The L indicator appears.

R: The R indicator appears.

3 Operation status display

Tape running display

Pressing [STATUS] once makes the on-screen display appears.

After that, press the button repeatedly to change the display as

follows:

No display> Tape counter> Remaining tape time

^-------------------------------------------------------------------------}

≥Press [¢, RESET] to reset the tape counter (elapsed time) to

“0:00.00”.

The tape counter is automatically reset to “0:00.00” when

inserting a video cassette.

≥The remaining time is approximate. It will be incorrect if you set

the wrong tape time in the “Tape length” item in the “Setup”

menu and if the tape is of poor quality.

Tape indicator

Displayed when a video cassette is inserted.

6 Recording mode

VHS

L R

0 : 00 . 22

SP 1

12 4

Playing a video cassette

RQTV0136.book 33 ページ２００６年４月１９日　水曜日　午後１時２８分

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 75 76

Comments to this Manuals

No comments

Panasonic DMRES35V User Manual Page 33

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRES35V