Panasonic ERGC70 User Manual download pdf (Page 6)

English

Cleaning

Cleaning with brush

1. Disconnect the power cord from the

clipper.

Be sure to set the switch to “0” before you

remove the blade.

2. Remove the comb attachment.

3. Hold the main body, place your thumb

against the blades and then push

them away from the main body.

•

4. Brush off any hair trimmings from the

main body and from around the blade.

5. Brush any hair trimmings out from

between the stationary blade and the

moving blade while pressing down

the cleaning lever to raise the moving

blade.

Cleaning in water

The mark on the left means suitable for cleaning under

an open water tap.

Warning

Disconnect the power cord from the clipper before cleaning

it in water to prevent electric shock.

1. Disconnect the power cord from the

clipper.

2. Remove the blade.

3. Rinse off any hair trimmings that are

sticking to the blades with running

water.

4. Rinse out any hair trimmings that are

inside the clipper with running water.

5. Gently shake the clipper 4 or 5 times and then wipe off

any water drops from the clipper and the blade.

6. Place the clipper on a towel with the power switch on

the main body facing downwards to let it dry fully.

Lubrication

Apply the oil to the clipper before and

after each use.

Apply a drop of the oil to the points

indicated by the arrows.

Remounting the blade

Fit the mounting hook into

the blade mounting on the

clipper and then push in until

you hear a click.

1 2 3 4 5 6 7 8 9 10 11 ... 119 120

Comments to this Manuals

No comments

Panasonic ERGC70 User Manual Page 6

Comments to this Manuals

Related products and manuals for For Home Panasonic ERGC70