Panasonic NNE202CB User Manual download pdf (Page 6)

1. Switch the oven off before cleaning and

unplug at socket if possible.

2. Keep the inside of the oven, door seals and

door seal areas clean. When food splatters

or spilled liquids adhere to oven walls, door

seals and door seal areas wipe off with a

damp cloth. Mild detergent may be used if

they get very dirty. The use of harsh

detergent or abrasives is not recommended.

3. Your oven cavity is constructed of zinc

coated steel, painted with an extremely

durable coating. After use, the oven interior

should be wiped out to remove any

remaining water in order to reduce the risk of

corrosion to the cavity and door.

The cavity and door can be damaged by

abrasive cleaners and sharp objects so care

must be taken to avoid damage caused in

this way. If the cavity or door become

damaged the lining may begin to corrode.

Providing the above precautions are taken

regarding the cleaning and care of your oven

the life of the cavity and door may be

extended.

4. The outside oven surface should be cleaned

with a damp cloth. To prevent damage to the

operating parts inside the oven, water should

not be allowed to seep into the ventilation

openings.

5. If the Control Panel becomes dirty, clean

with a soft, dry cloth. Do not use harsh

detergents or abrasives on Control Panel.

When cleaning the Control Panel, leave the

oven door open to prevent the oven from

accidentally turning on. After cleaning touch

STOP/CANCEL Pad to clear display window

or turn TIMER/WEIGHT SELECT DIAL back

to ZERO position.

6. If steam accumulates inside or around the

outside of the oven door, wipe with a soft

cloth. This may occur when the microwave

oven is operated under high humidity

conditions and in no way indicates a

malfunction of the unit or microwave

leakage.

7. It is occasionally necessary to remove the

glass turntable for cleaning. Wash the tray in

warm soapy water.

8. The roller assembly and oven cavity floor

should be cleaned regularly to avoid

excessive noise. Simply wipe the bottom

surface of the oven with mild detergent and

hot water then dry with a clean cloth. The

roller assembly may be washed in mild

soapy water. Cooking vapours collect during

repeated use but in no way affect the bottom

surface or the roller assembly.

After removing the roller assembly from

cavity floor for cleaning, be sure to replace it

in the proper position.

1. Service

WHEN YOUR OVEN

REQUIRES A SERVICE

call your local Panasonic

engineer (08705 357357

Customer Support).

It is hazardous for anyone other than a

competent person to carry out any service or

repair operation which involves the removal

of a cover which gives protection against

exposure to microwave energy.

2. Door Seals

Do not attempt to tamper with or make any

adjustments or repairs to door, control panel

housing, safety interlock switches or any

other part of the oven. Do not remove outer

panel from oven.

The door seals and door seal areas should

always be kept clean – use a damp cloth.

N.B. The appliance should be inspected for

damage to the door seals and door seal

areas. If these areas are damaged the

appliance should not be operated until it has

been repaired by a service technician trained

by the manufacturer.

3. Oven Light

The oven lamp must be replaced by a

service technician trained by the

manufacturer. DO NOT attempt to remove

the outer casing from the oven.

4. Spare Parts

These may be ordered from Customer Care

Centre (08705 357357). Ensure you quote

correct model number.

Care & Cleaning of your Microwave Oven - IMPORTANT

As microwaves work on food particles, keep your oven clean at all times.

Maintenance of your oven

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

Comments to this Manuals

No comments

Panasonic NNE202CB User Manual Page 6

Comments to this Manuals

Related products and manuals for Microwaves Panasonic NNE202CB