Panasonic TH85PF12E User Manual download pdf (Page 50)

3D Y/C Filter (NTSC)

Colour system

Signal

Auto

Cinema reality

Panasonic Auto (4 : 3)

Off

4 : 3

[

]

Noise reduction

Off

Cinema reality

Off

XGA Mode

Auto

Setup for Input Signals

Colour system / Panasonic Auto

Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)

Press to select the “Colour system” or

“Panasonic Auto (4:3)”.

Press to select each functions.

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases

become unstable. Should this occur, set the system to match the format of the input signal.

Cinema reality

Press to select Cinema reality.

Press to set On / Off.

Cinema reality:

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which

are recorded at 24 frames per second. If the picture is not stable, turn the setting to off.

Note:

When On, this setting only affects the following signal input:

• NTSC / PAL signal input during “AV (S Video)” input signal.

• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during “Component” input signal.

Mode Function

Colour system

Set the colour system to match the input signal. When selecting “Auto”, the Colour system is automatically

selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on

the attached terminal board. To display M.NTSC signal, select “M.NTSC” in Colour system.

To display PAL60 signal, select “PAL” when BNC Dual Video Terminal Board (TY-FB9BD) is used. For

other Video Terminal Boards, select “M.NTSC”.

Auto SECAM M.NTSC NTSCPAL

Panasonic Auto

(4 : 3)

Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is selected.

If you would like to view 4:3 images in Just format, set to “Just”.

Note:

Panasonic Auto does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

Note:

After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as

necessary. (see page 23)

XGA Mode

This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with

60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and

1,366 × 768 @ 60Hz).

Press to select “XGA Mode”.

Press to select “Auto”, “1024×768”, “1280×768” , “1366×768”.

Auto: Automatically selected from 1024×768/1280×768/1366×768.

Switch the setting to suit the input signal for better display

depends on the angle of view or display resolution condition.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 65 66

Comments to this Manuals

No comments

Panasonic TH85PF12E User Manual Page 50

Comments to this Manuals

Related products and manuals for Plasma TVs Panasonic TH85PF12E