Panasonic TH85PF12E User Manual download pdf (Page 53)

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup

Display orientation

Landscape

MULTI PIP Setup

Portrait Setup

2/2Setup

--:--:--:--:--:--

DHCP

Network Setup

Save

192.168. 0. 8

255.255.255. 0

192.168. 0. 1

1024

Auto

RS-232C

Off

Subnet mask

LAN Speed

Gateway

IP address

Port

Control I/F Select

Network ID

MAC address

Network Setup

Make the various settings to use the network function.

DHCP, IP address, Subnet mask, and Gateway settings

1 Set DHCP.

When “Off” is selected, IP address and other settings can be set

manually.

2 Select the item and press .

3 Enter an address.

192.168. 0. 8

IP address

Use to select a digit.

Use to change a number.

Press .

Pressing will cancel the address change.

4 Select “Save” and press .

Port setting

1 Select “Port” and press .

2 Enter a port number.

01024

Port

Use to select a digit.

Use to change a number.

Press .

Pressing will cancel the port number change.

Save

Save the current network Setup. Each value set for

DHCP, IP address, Subnet mask, and Gateway will be

saved. If “NG” is displayed, check the same IP address

is not used within the same network.

DHCP (DHCP client function)

To obtain an IP address automatically using a DHCP

server, set this to “On”. If DHCP server is not used, set

this to “Off”.

IP address (IP address display and setting)

Enter an IP address if DHCP server is not used.

Subnet mask (Subnet mask display and setting)

Enter a subnet mask if DHCP server is not used.

Gateway (Gateway address display and setting)

Enter a gateway address if DHCP server is not used.

Port

Set the port number used for command control.

The available setting range is 1024 – 65535.

When the PJLink™ protocol is used, the port setting is

not necessary.

LAN Speed

Set the connection speed of the LAN environment.

Select the value from Auto, 10 Half, 10 Full, 100 Half or

100 Full.

Network ID

Set the ID to identify this unit.

The available setting range is 0 – 99.

Control I/F Select

Set whether to control with RS-232C (serial) or LAN.

When “LAN” is set, the slot power is turned on, and power

indicator is lit orange under the condition of power “Off”

with remote control (stand-by state), regardless of the

“Slot power” setting. (see page 56)

MAC address

Display the MAC address of this unit. However, the MAC

address is not displayed when the “Control I/F Select” is

set to “RS-232C”.

Notes:

• To use a DHCP server, make sure the DHCP server is started.

• Contact your network administrator for details on settings.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 65 66

Comments to this Manuals

No comments

Panasonic TH85PF12E User Manual Page 53

Comments to this Manuals

Related products and manuals for Plasma TVs Panasonic TH85PF12E