Panasonic WJHD316 Operations Instructions download pdf (Page 10)

Please check the documentation supplied with your monitor

to see if your VGA monitor supports a refresh rate of 50 Hz.

If your VGA monitor does not support 50 Hz (or if you are

not sure), then turn off your VGA monitor before turning on

WJ-HD316/WJ-HD309 when using your television as a dis-

play.

o Alarm Connector (ALARM)

Connect an external device such as a sensor or a door

switch with this D-Sub 25-pin connector.

!0 Alarm/Control Connector (ALARM/CONTROL)

Connect a control switch with this D-Sub 25-pin con-

nector when controlling this unit using an external

device, or when controlling an alarm device such as a

buzzer or a lamp.

!1 PS·Data Ports (DATA)

Connect PS·Data compatible devices with these ports.

!2 Mode Switches (MODE)

Set the operation mode of this unit with these dip

switches.

!3 RS485 Ports (RS485 (CAMERA))

Connect RS485 compatible combination cameras with

these ports.

!4 Network Port (10/100BASE-T)

Connect this unit to a network compatible with 10BASE-

T or 100BASE-Tx when controlling this unit using a PC

via a network.

!5 Copy Port (COPY1)

Connect a recommended DVD-RAM drive, CD-R drive

or DVD-R drive with this port.

!6 Extra Storage Port (EXT STORAGE)

Connect an optional extension unit (WJ-HDE300) with

this port.

!7 Power Switch (POWER)

Turns the power of this unit on and off.

!8 Signal Ground Terminal (SIGNAL GND)

!9 Power Cord Inlet (AC IN)

Connect the power cord to this inlet.

■ On the Monitor 1 (To display

only live image)

Important:

• The SETUP MENU cannot be displayed on the monitor

• It will take around 2 minutes to display live image on the

monitor 1 after turning on the power of the unit.

1. Camera Title

Displays the edited camera title.

A position to display a camera title can be selected

from the following.

Upper left, upper right, lower left, lower right, centre

The default camera title position is lower right (R-

LOWER).

Note: The camera title will be displayed with 16 charac-

ters (2 lines: 8 characters per line).

2. Time

Displays the current time (hour:minute:second) and

date (day:month:year).

A position to display the time can be selected from the

following.

Centre, upper left, lower left, upper right, lower right

The default time display position is lower left (L-

LOWER).

Note: When the camera title and the time display are

layered, only the time display will be displayed.

3. Alarm Display

When an alarm has occurred, an alarm display will be

displayed.

The alarm display will be displayed differently as fol-

lows depending on which alarm has occurred.

VMD-*: When motion is detected.

LOSS-*: When video loss has occurred.

COM-#: When a command alarm has occurred.

TRM-#: When a terminal alarm has occurred.

*: Camera number (1 - 16 for the WJ-HD316, 1 - 9 for

the WJ-HD309)

#: Event number

Note: Refer to page 44 for further information about

event types and event actions.

wewe

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 163 164

Comments to this Manuals

No comments

Panasonic WJHD316 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Security cameras Panasonic WJHD316