Panasonic WJHD316 Operations Instructions download pdf (Page 158)

158

Check item/Remedy

Problem

Page

Alarm operations are not acti-

vated.

"VIDEO LOSS" appears on the

monitor.

"THERMAL" appears on the

monitor.

The clock does not keep cor-

rect time.

When you power on the unit,

HDD DISK MENU is displayed.

• Check if alarm input signals are properly input to the

ALARM or ALARM/CONTROL at the rear panel.

• Check the camera connections.

• Check if the ambient operating temperature is between

+5 °C and +45 °C.

• When the inside of unit exceeds 45 °C, "THERMAL" may

appear even within the ambient temperature mentioned

above.

• If "THERMAL" frequently appear on monitors, refer to the

dealer. The unit may have trouble.

• Check if the built-in backup battery has been charged

enough. If not so, supply power to the unit for 48 hours or

more to recharge the battery.

• Check if HDDs were added or removed. If so, the HDD

DISK MENU will be displayed automatically.

• If the HDD DISK MENU is displayed even though no

HDDs were added or removed, Refer to the dealer. The

HDD may have trouble.

• Check if the built-in backup battery has been worn out.

The battery can endure for approx. 5 years. (The

endurance may differ depending on conditions.)

• If the camera connections are proper, refer to the dealer.

Cable wires may be snapped or the unit may have trou-

ble.

• Check the settings of the ALARM connector.

• Check if the operation mode is set to ALARM (alarm

mode).

Refer to p. 81

and 85.

Refer to p. 68.

Refer to p. 5

and 13.

Refer to p. 5.

Refer to p. 129.

–

Refer to p. 5.

–

Refer to p. 85.

Refer to p. 105.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 164

Comments to this Manuals

No comments

Panasonic WJHD316 Operations Instructions Page 158

Comments to this Manuals

Related products and manuals for Security cameras Panasonic WJHD316