Panasonic WV-SP302 Installation Guide download pdf (Page 17)

Lens mounting

Slowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens con-

nector of the camera.

Important:

SP305

SP302

 • Itisimpossibletouselenseswithoutthefocusadjustmentfunctionorzoomlenses.

Optional dedicated lens

Product name Model number

ALC lens for 1/3 type CCD cameras WV-LZA62/2

2x vari-focal (High resolution)

* If a lens for 1/3 type video camera other than the above is mounted and the camera is used at

resolution of 1280 x 720 or higher, the camera cannot achieve full performance of high resolu-

tion. It is recommended to use a dedicated high-resolution lens especially when the illuminance

level of the photographic subject is low and the camera is used with the lens iris open.

How to adjust the focus

SP306

z Before adjustment, reset the back focus position by holding down the auto back focus button

for 5 seconds or more when the power is on. (This operation can also be performed on the

setup menu. Refer to the Operating Instructions (PDF).)

x Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens to center

a subject in the screen, and then press the auto back focus button on the side of the camera

(☞ page 16) or perform the auto back focus function from the setup menu.

Refer to the Operating Instructions (PDF) for how to perform the auto back focus function from

the setup menu.

CS-mount lens

(option)

Zoom lock knob

Focus ring

ALC lens connector

Protruded portion

from mount face:

ø20 mm {25/32

inches} or less

Protruded portion from ﬂange face:

4.5 mm {5/32 inches} or less

1 3

2 4

Pin No.

1 Dump @

2 Dump !

3 Drive !

4 Drive @

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments

Panasonic WV-SP302 Installation Guide Page 17

Comments to this Manuals

Related products and manuals for Security cameras Panasonic WV-SP302