Panasonic WV-SP302 Installation Guide download pdf (Page 29)

Configure the network settings

Install the software

Before installing the software, read the readme file on the provided CD-ROM first.

Software included on the provided CD-ROM

 • PanasonicIPsettingsoftware

Configure the network settings of the camera. Refer to the following for further information.

 • ViewerSoftware"NetworkCameraView4"

It is necessary to install the viewer software "Network Camera View 4" to display images on a

PC. Install the viewer software by double-clicking the "nwcv4setup.exe" icon on the provided

CD-ROM.

Configure the network settings of the camera using the

Panasonic IP setting software

It is possible to configure the network settings of the camera using the IP setup software on the

provided CD-ROM.

When using multiple cameras, it is necessary to configure the network settings of each camera

independently.

If the Panasonic IP setting software does not work, configure the network settings of the camera

and the PC individually on the "Network" page of the setup menu. Refer to the Operating

Instructions (PDF) for further information.

Important:

 • WhenusingMicrosoftWindowsVista,the"WindowsSecurityAlert"windowmaybedisplayed

when starting the IP setup software. In this case, disable "User Account Control" from the con-

trol panel.

 • Forthesecurityenhancement,theMACaddress/IPaddressofthecameratobeconfiguredwill

not be displayed when around 20 minutes have passed after turning on the power of the cam-

era. (when the effective period is set to "20min only" in the Easy IP setup)

 • PanasonicIPsettingsoftwareisinoperableinothersubnetsviathesamerouter.

 • ThiscameracannotbedisplayedorsetwithanolderversionoftheIPsetupsoftware(version

2.xx).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Panasonic WV-SP302 Installation Guide Page 29