Panasonic KX-TS4200B Operations Instructions download pdf (Page 58)

Useful Information

For assistance, please visit http://www.panasonic.com/phonehelp

Programmable settings

Making/answering calls, intercom

You cannot hear a

dial tone.

L Check the connections (see “Connecting the handset and

AC adaptor” on page 14).

L Confirm the telephone line cord is properly connected

(page 15, 16, 17).

L Disconnect the unit from the telephone line and connect a

known working telephone. If the working telephone

operates properly, contact our service personnel to have

the unit repaired. If the working telephone does not

operate properly, contact your telephone service provider.

You cannot dial. L Check whether the dialing mode selection is correct (see

“Dialing mode” on page 24).

Date and time on the

display flashes.

L Set the date and time (see “Date and time” on page 24).

L If you subscribe to Caller ID service, date and time is

automatically set when an outside call is received (see

“Automatically setting date and time” on page 44).

The battery is

discharged.

L Please remove the battery when you cut the power

supply, as the battery will discharge automatically once

the power is cut according to the time shown on page 12.

How do I return to

standby mode

quickly?

L Lift the handset, then place it back on the cradle.

L Press {SP-PHONE} 2 times.

Problem Cause/solution

You cannot program

function items, such

as the dialing mode.

L Programming is not possible while in the talk or intercom

mode.

L Do not pause for over 30 seconds while programming.

L Make sure that the unit is in standby mode.

Problem Cause/solution

Static is heard, sound

cuts in and out.

L If your unit is connected to a telephone line with DSL

service, we recommend connecting a noise filter between

the unit and the telephone line jack (see “Connecting 2

two-line telephone jacks” on page 18, “Connecting four

single-line telephone jacks” on page 19). Contact your

DSL provider for details.

You cannot redial the

last number dialed.

L If the last number dialed was more than 32 digits long, the

number cannot be redialed.

L Access numbers entered after pressing {*} (TONE) will

not be included when redialing.

Problem Cause/solution

KXT4200_OI.book Page 58 Friday, September 1, 2006 8:53 AM

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Comments to this Manuals

No comments

Panasonic KX-TS4200B Operations Instructions Page 58

Comments to this Manuals

Related products and manuals for Telephones Panasonic KX-TS4200B