Panasonic EY7542 User Manual download pdf (Page 11)

-

11

-

Battery Pack Life

The rechargeable batteries have a

limited life. If the operation time be-

comes extremely short after recharg-

ing, replace the battery pack with a

new one.

Battery Recycling

ATTENTION:

FOR Li-ion Battery Pack, EY9L40

A Li-ion battery that is recyclable powers

the product you have purchased. Please

call 1-800-8-BATTERY for information on

how to recycle this battery.

[Battery Charger]

Charging

Cautions for the Li-ion Battery

Pack

• If the temperature of the battery pack

falls approximately below −10°C

(14°F), charging will automatically

stop to prevent degradation of the

battery.

Common Cautions for the Li-

ion/Ni-MH/Ni-Cd Battery Pack

• The ambient temperature range is

between 0°C (32°F) and 40°C (104°F).

If the battery pack is used when the bat-

tery temperature is below 0°C (32°F),

the tool may fail to function properly.

• When charging a cool battery pack

(below 0°C (32°F)) in a warm place,

leave the battery pack at the place

and wait for more than one hour to

warm up the battery to the level of the

ambient temperature.

•

Cool down the charger when charging

more than two battery packs consecu-

tively.

• Do not insert your fingers into contact

hole, when holding charger or any

other occasions.

CAUTION:

To prevent the risk of fire or damage

to the battery charger.

• Do not use power source from an

engine generator.

• Do not cover vent holes on the

charger and the battery pack.

• Unplug the charger when not in use.

Li-ion Battery Pack

NOTE:

Your battery pack is not fully charg-

ed at the time of purchase. Be sure

to charge the battery before use.

Battery charger (EY0L80)

1. Plug the charger into the AC outlet.

NOTE:

Sparks may be produced when the

plug is inserted into the AC power

supply, but this is not a problem in

terms of safety.

2. Insert the battery pack firmly into the

charger.

1. Line up the alignment marks and

place the battery onto the dock on

the charger.

2. Slide forward in the direction of the

arrow.

Alignment marks

3.

During charging, the charging lamp will

be lit.

When charging is completed, an inter-

nal electronic switch will automatically

be triggered to prevent overcharging.

• Charging will not start if the battery

pack is warm (for example, immedi-

ately after heavy-duty operation).

The orange standby lamp will be

flashing until the battery cools down.

Charging will then begin automati-

cally.

4. The charge lamp (green) will flash

slowly once when the battery is

approximately 80% charged.

5. When charging is completed, the

charging lamp will start flashing quickly

in green color.

EY7542(UL).indb 11 2007/07/25 11:34:03

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments