Panasonic EY7542 User Manual download pdf (Page 3)

-

3

-

I

. INTRODUCTION

This tool is the Multi-Impact & Drill

driver that has 2 operation modes,

“Impact Driver mode” and “Drill Driver

mode”. The modes can be selected by

sliding the impact/drill driver switch.

II

.

GENERAL SAFE-

TY RULES

WARNING! Read all instructions

Failure to follow all instructions listed

below may result in electric shock, fire

and/or serious injury. The term “power

tool” in all of the warnings listed below

refers to your main operated (corded)

po wer to ol and ba ttery opera ted

(cordless) power tool.

SAVE THESE INSTRUCTIONS

Work Area Safety

1) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2) Do not operate power tools in explo-

sive atmospheres, such as in the

presence of flammable liquids,

gases or dust.

Power tools create sparks which may

ignite the dust or fumes.

3)

Keep children and bystanders

away while operating a power tool.

Distractions can cause you to lose

control.

Electrical Safety

1) Power tool plugs must match the

outlet. Never modify the plug in

any way. Do not use any adapter

plugs with earthed (grounded)

power tools.

Unmodified plugs and matching

outlets will reduce risk of electric

shock.

2)

Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or

grounded.

3)

Do not expose power tools to rain

or wet conditions.

Water entering a power tool will

increase the risk of electric shock.

4)

Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts.

Damaged or entangled cords increase

the risk of electric shock.

5)

When operating a power tool out-

doors, use an extension cord suit-

able for outdoor use.

Use of a cord suitable for outdoor use

reduces the risk of electric shock.

Personal Safety

1) Stay alert, watch what you are doing

and use common sense when oper-

ating a power tool. Do not use a

power tool while you are tired or

under the influence of drugs, alcohol

or medication.

A moment of inattention while operating

power tools may result in personal

injury.

2)

Use safety equipment. Always wear

eye protection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

3)

Avoid accidental starting. Ensure the

switch is in the off position before

plugging in.

Carrying power tools with your finger

on the switch or plugging in the power

tools that have the switch on invites

accidents.

4)

Remove any adjusting key or wrench

before turning the power tool on.

A wrench or a key left attached to a

rotating part of the power tool may

result in personal injury.

5)

Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

6)

Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away from

moving parts.

Loose clothes, jewellery or long hair

can be caught in moving parts.

EY7542(UL).indb 3 2007/07/25 11:33:43

1 2 3 4 5 6 7 8 ... 47 48

Comments to this Manuals

No comments