Panasonic WV-BP100 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
(6) Electronic Light Control ON/OFF Switch
(ELC ON/OFF)
OFF :
Choose this position used with an auto iris lens.
ON :
Choose this position used with a fixed or
manual iris lens.
See page 6 for more details.
(7) Video Output Connector (VIDEO)
A 1.0 Vp-p/75 ohms composite video signal is
provided at this connector.
(8) AC Power Cord
(9) AC 24V In Terminal (AC 24V IN)
This terminal accepts 24V AC power source (19.5V -
28V). Be sure to connect grounding lead to the GND
terminal.
Cautions:
1. Connect this to a 24V AC class 2 power supply
only.
2. To prevent fire or shock hazard, the UL listed
wire VW-1, style 1007 should be used for the
cable for AC 24V Input Terminal.
ELC (Electronic Light Control)
In this mode a continuously variable electronic shutter is
employed to automatically control exposure times in the
CCD Image Sensor, according to the incoming light level.
With this mode selected, fixed or manual iris lens can be
used instead of an ALC type lens.
Cautions:
1. Under bright conditions such as outdoors, use an
ALC type lens as the ELC control range is not wide
enough under these conditions.
2. Under certain unique lighting conditions, the
following may appear:
'Strong smear and/or blooming on high light objects
such as spot lights or windows.
Noticeable flicker on the picture,
Should these phenomena occur, use an ALC lens
3. When using in the ELC mode with a fixed iris lens,
the depth of field of the image may be less than
that obtained by using an ALC lens. Depth of field
varies inversely with the iris opening. Thus, using
this camera in the ELC mode with the fixed iris lens
fully opened will result in less depth of field than if
an ALC lens was used. (And distant objects in the
picture might not be in focus).
- 6 -
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments