Panasonic WV-BP100 User Manual download pdf (Page 9)

CONNECTIONS

Power Source

■ WV-BP100

Connect the AC Power Cord (8) to a electrical outlet of

120VAC60HZ.

■ WV-BP104

1. A power supply of 24V AC 60 Hz is required.

2. Connect the power cable to the 24V AC In Terminal

(9) on the rear panel of the camera.

24V AC

(19,5V- 28V)

60 Hz .

Video Cable

1. It is recommended to use a video monitor whose

resolution is at least equal to the camera's,

Terminate the camera output with 75-ohm resistor

at the furthest end of its cable run.

It is recommended to use 75-ohm coaxial cable.

Always set the last monitor’s termination switch

to 75 ohms, and set the termination switches

of intermediate monitors to high Impedance (Hi-Z)

position.

Monitor

Recommended wire gauge sizes for 24V AC line.

Copper wire

size (AWG)

#24

(0.22mm^)

#22

(0.33mm^)

#20

(0.52 mm^)

#18

(0.83mm^)

Length

(ft)

314 495 842 1403

of Calbe

(Approx.)

(m)

150

255

425

Caution:

To prevent fire or shock hazard, the UL listed wire

VW-1, style 1007 should be used for the cable for

AC 24V Input Terminal.

The maximum extensible coaxial cable length

between the camera and the monitor is shown

in the table 1. Since cable quality varies among

manufactures, verify video quality before final

installation if maximum lengths are to be used.

-7-

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

Panasonic WV-BP100 User Manual Page 9

Comments to this Manuals

Related products and manuals for Video surveillance systems Panasonic WV-BP100